Black Fire Cement 1250 C - 310ml for Fireplace, Stove, Boilers etc

Product Information

Gr8Fires on How this living room was transformed with a media wall featuring the Ezee Glow Celestial Built-In Electric Fire In the case of porous surfaces, slightly moistening them can improve adhesion. It is always recommended to conduct a preliminary adhesion test on the specific substrate to ensure compatibility and optimal performance.

Do not let any unnecessary putty to dry out on the surfaces of the stove or flue pipe. This excessive fire cement can become incredibly difficult to remove later on. What is the maximum output in kW of your "5kW" wood burning stove? The majority of manufacturers just specify the “nominal output” and this figure means very little in real life. The nominal is a figure the manufacturer chooses to sell the stove at - the stove is capable of reaching at least this output with one fuel load. Nominal means "capable of". But it is not the maximum. Clean any uncured sealant immediately after use with water. Wipe off any excess sealant to avoid it drying on surfaces. Please note that once the sealant cures, it becomes difficult to remove. Therefore, it is essential to clean the product residue promptly. Soudal Firecement HT° is a top-quality, high temperature resistant fire cement sealant designed for applications where extreme heat is a concern. With its exceptional capabilities, this product offers reliable sealing and protection in various environments. It is effortless to use, ready to be applied directly from the container without any additional mixing or preparation. Fire putty is also widely used for sealing against the escape of smoke and flue gases in residential and commercial appliances, such as stoves, chimneys, and central heating systems. How to Use Fire Cement on Flue Pipe?No wood-burning stove installation is complete with a trusty tube of high temperature silicone sealant.

Sealing of joints and openings where high temperatures are possible: Soudal Firecement HT° is ideal for sealing joints and openings in environments where high temperatures could be encountered.Does not contain Asbestos or other harmful components: Soudal Firecement HT° is free of asbestos and any other harmful components, ensuring a safer working and living environment. One of the significant benefits of Soudal Firecement HT° is that it does not contain asbestos or any other harmful components. This makes it a safe choice for internal use, giving you peace of mind when applying it in various applications. The absence of hazardous materials ensures a healthier working and living environment, making this fire cement sealant an excellent choice for both professionals and DIY enthusiasts. Once the sealant is applied, it can be smoothly finished using the Soudaglatt Smoothing Tool or a similar tool of your choice. Simply run the tool smoothly along the sealant line to create an even finish. Before applying Soudal Firecement HT°, it is essential to ensure that the surfaces are clean, dry, and free of dust and grease. Any loose debris or contaminants should be removed thoroughly. The solution to both those problems is silicon sealant, like the Heatmate High Temperature Silicone Sealant we sell. Why use high temperature silicone sealant?

Good stuff. Does exactly what it says on the tin, well the tube at least. Easy to apply, and stops all vapour leaks.”– Robert Ready to use: Soudal Firecement HT° is ready to use straight from the container, eliminating the need for additional mixing or preparation. Fire Cement is a ready and mixed combination of thermosetting resins and inorganic fillers. When applied and exposed to high temperatures, this combination is capable of healing, which results in a mortar. This mortar is temperature resistant up to 1250ºC. Of course, there are lots of other uses for high temperature silicone sealant that don’t involve your woodburner. What people say about Heatmate High Temperature Silicone SealantIf a smoothing tool is not available, a wetted finger can be used to achieve a similar effect. Perform the finishing process before the sealant begins to skin, ensuring a neat and tidy appearance. The sealant can withstand temperatures up to 300°C, which makes it the ideal solution to the problems outlined above. Where can you use high temperature silicone sealant?

Curing Time: Allow the sealant to dry and cure according to the manufacturer's instructions. The curing time may vary depending on environmental conditions, but ensure the caulk is fully cured before painting or finishing. Open and close the door on a cheap Chinese stove. Then open and close the door on a DG stove, Arada stoves, Woodford stoves, Hamlet stoves or Saltfire stoves. You’ll understand the difference. Apart from this, professionals also recommend cleaning all surfaces from dust, grease, oils, and other contaminant substances. You should take a step further and wet all the surfaces before applying the fire putty. How Long for Fire Cement to Dry? Sealing of joints and openings at furnaces, chimney flues, heating systems, central heatings, barbecues, etc.: This fire cement sealant is suitable for a wide range of applications, including sealing joints and openings in furnaces, chimney flues, heating systems, central heatings, barbecues, and more.

Fire Cement Trade 290ml

Heat Resistant up to 1500°C: This fire cement sealant is specially formulated to withstand extreme temperatures of up to 1500°C, providing reliable heat resistance in demanding applications. Smooth the Surface: For best results, spray the surface with a soapy solution before the sealant begins to skin. This solution enables easy smoothing and ensures a smooth, professional finish. You can use a caulking tool or a wet finger to smooth the caulk and remove any excess. To avoid smoke seeping into your room, you don’t want any gaps through the components of your stove system where it might get out. Equally, to avoid causing damage to your stove and get the most value from the fuel you burn, you do not want air to be able to get into your stove through such gaps and cause the appliance to operate at too high a temperature.