KitchenCraft Flexible Bowl Scraper Tool, Plastic, 17 x 10 cm,White

Product Information

As its name suggests, the Robert Sorby Rim Cutter is the ideal tool to deliver a fine rim on small bowls and boxes. Use the diamond honing card to apply a burr by holding the card flush with the bevel edge and make up and down motions. With the extra burr added to the scraper edge applied with the burnishing tool, raise the tool rest a bit and angle the scraper downward. Because the handle is made from chunky acrylic, there’s no need to remove the head from the handle before lobbing into the dishwasher.

In general, a steep 90° angle scraper is going to have the most abrupt effect on the wood surface and dull very slowly. Presenting a scraper angle, this extreme into turning wood fibers will not do much besides scratch the surface. The honing card can quickly clean up the edge and freshen up the burr between more thorough trips to the sharpening wheel. When a continuous smooth surface appears along the entire bevel, the sharpening process is complete.An angle around 65 to 60-degrees works for me, however, you might find a different angle works better for you. Most bowl scrapers are pretty similar but there still may be some individual characteristics that will matter or stick out to you. These are simple white scrapers that are flexible and are made to be comfortable and easy to handle.

I’m Kent, a husband, dad, papa, graphic designer, photographer, artist, traveler, birder, dark chocolate lover and I’m addicted to turning wood bowls! Both scrapers have a 6 inch wide, bevel edged, stainless steel blade complete with measurement guide in inches, and an ergonomic non-slip handle. Corralling cut ingredients from your cutting board is an essential kitchen skill, and using a fast, lightweight bowl scraper like this one makes the process almost second nature. Formerly known as the Hardwood Scraper it was originally designed to tackle hardwoods when producing musical instruments.This small and perfect silicone spoon became a firm favourite in the kitchen, smoothly mixing, folding, and beating without damaging cookware. This seat is machined into both sides of the shaft so that when cutting either side of the captive ring, the cutter is angled to the front and into the direction of the cut, giving more control over the cut whilst keeping the tool flat on the rest.