Fight dampness & humidity - Moisture Trap Damp Control (2 x 500g refills)

Product Information

With a 300ml capacity, these mini dehumidifiers disposable can collect a massive amount of condensation, preventing mould and the resulting health consequences.

Moisture Trap Refill Crystals 2.5kg | Lakeland Moisture Trap Refill Crystals 2.5kg | Lakeland

Kontrol Streamline Dehumidifier is an efficient product that helps reduce the relative humidity in damp rooms to an acceptable level. Our dehumidifiers require no power and work by attracting and extracting the excess moisture in the air.Mohammed has gathered enough experience from his time practicing as a professional architect and now has vast knowledge in home designs and aesthetics. It is by the nature of the crystals in the trap that they attract moisture, so you could place on in your kitchen and see it fill up.

Moisture Absorbers | Moisture Traps | Screwfix

I suppose if you have a surplus of water vapour in the caravan to start with, using moisture traps, dehumidifier and the like may normalise the air. As an example the walls of a caravan are in shade and cool, however the sun warms the roof which in turn warms the air inside the caravan, the air is only slightly warmer than the caravan walls, however this difference is sufficient for the warmer air to give up its moisture when it comes into contact with the caravan wall in the form of condensation.

The final example here is the Badger 50-054 Air Regulator, Filter and Gauge, for mounting directly to the compressor outlet port.

Mega Moisture Trap 2Ltr - Screwfix Kontrol Mega Moisture Trap 2Ltr - Screwfix

While this result occurred due to high ambient air humidity, you may find that you are much more susceptible to this with lower air humidity if you don’t use a water trap on your compressor.Especially useful to dry our damp rooms, reduce condensation and prevent mould and mildew building up. Below is the Paasche R-75 Regulator and Moisture Trap which combines a water trap with an air pressure regulator and gauge for controlling pressures up to 100psi, which should be suitable for most airbrush compressor pressure ranges. The solution here is to ensure your compressor and associated parts are sufficiently cooled, or to simply stop airbrushing for a little while and allow a hot compressor to cool.