EVAPO-RUST® C700 Rust Remover, 946 ml

Product Information

Well, let’s start off with the competition. Products such as Metal Rescue, Loctite Naval Jelly, WD-40 and others tend to work out well. In addition, they don’t cost as much as the high-end products. However, they don’t perform the same on different metal surfaces. Moreover, some of them can take more than 24 hours to start having a noticeable effect. Items that are not obviously damaged but do not appear to work correctly must be returned to base for inspection, report and rectification. EVAPO-RUST® is an amazing RUST REMOVER which is utilized by the U.S. Army, U.S. Navy, U.S. Air Force, FBI, NATO, Government Contractors, Engine Builders, Auto Enthusiasts, Gunsmiths, Forensic Labs, OEM’s, Farmers, Antique Restorers and more. Aside from Evapo-Rust, you’ll need a few other tools and items to perform the removal safely. First off, you’ll require a container with a lid. For large pieces of metal, I recommend transparent modular plastic bins, since they are durable and you can seal them shut. But if you plan on removing rust from small items such as nuts and bolts, everyday plastic kitchen containers will do just fine. The final reason why so many people give this product a five-star rating is the fact that it’s so easy to use. Furthermore, it leaves no stains behind and the rust-free item will look brand new, as if you didn’t even use a remover on it hours ago. Where to Buy the Product

On the other hand, submerging the item halfway can actually work. However, you will have to flip the item over and submerge the other half as well. It’s a process that’ll take a lot longer than full submersion, but it still works if you have little Evapo-Rust left. Step 3: Give It TimeThe removal of the rust (iron oxide) reduces the proportion of iron to carbon, leaving a higher concentration of carbon on the outer surface. This heavier layer of carbon could cause a darkening of the metal due to the attributes of the carbon. The darkening does not have an adverse affect on the metal. It merely represents the movement of carbon from the interior of the metal to the exterior of the metal.

A lot of car bodies are really well rusting. You won't drive three days and will again see the rust coming out from paint edges. So I recommend you to paint the spot as soon as you get rid of rust. It will ensure optimal work of body for many years. For large spots it would be better to remove paint layer from the whole part and then use Evapo to remove rust. After that you can use prime coating and then usual car paint. It is safe for the user and non-corrosive to steel. It does not harm brass, copper, aluminum, gold, lead, titanium, steel, cast iron, chrome solder points, vinyl, plastic, rubber, silicone, glass, cork, or wood. EVAPO-RUST® can be used over and over until it absolutely stops working. On average, one gallon de-rusts up to 300 pounds of light to moderately rusted steel.However, there is one clear difference between acids and Evapo-Rust. While an acid will definitely get rid of rust, it also tends to eat away at the metal underneath. So, you’ll get rid of the iron(III) oxide, but lose a lot of healthy iron in the process. Also some buyers say that there aren't any positive sides in the product. I can't agree with it and I suppose these buyers have never used the Evapo-Rust. I also know that some small efficient companies buy tons of the product to use it in the production process. It can be effective in spheres of any production. Actually, this fact gives us more than warranty for optimal product quality. Now, the product CAN remove rust in cold weather, but the process will be a lot slower than usual. Moreover, if the plastic container with the metal item is out in the cold, it doesn’t speed up the process if you move it to a warm space. It’ll still take time to warm up, making the removal slower.

Items that are obviously damaged should be returned to base for inspection, report and rectification. It's very hard to give universal instruction of how to use the rust removing liquid. So, let's start with what producer says of how to use the liquid. It's stated that you can use the same portion of Evapo as many times as you want until it gets dark. Don't dispose the product as soon as you've achieved one of your goals. It'll reduce the costs and make your work with metal parts more effective. full safety for your hands, eyes and all other parts of body, there aren't any toxic materials in the product contents;After enough time has passed, take the metal item out of the plastic container. You should be able to see two distinct changes: years ago, David Harris created Evapo-Rust, a chemical solution that easily removes rust. Evapo-Rust is non-toxic, non-corrosive, and contains no acids, bases or petroleum solvents.