Spektrum IC5 Battery Connector (2) (SpektrumXCA501)

Product Information

To be honest, this is the first battery I've actually had to cut a connection off of in a long time, I normally buy batteries with no connectors which come with the wires already protected [obviously] so I don't have to worry about it. I didn't like the idea of just leaving the old connector on there while working on the other wire, it was in pretty bad shape. In that case, I preferred to tape up the wire and then work on the other. But yeah, I always work on one wire at a time, making sure that the other wire is insulated before working on the current wire. Like I stressed in the video, no matter your method, work on one wire at a time and make sure the other wire is protected first. Nicely done video @sonicslp. I'd say the only thing I would recommend doing differently would be to only work with one wire at a time. Only cut one wire, solder it, then cut the next and solder it.

IC5 Connector: Depth Comparison - Ampow Blog IC3 vs IC5 Connector: Depth Comparison - Ampow Blog

Soon after you have gotten your feet wet, however, you will need to choose a connector type. You would want to choose one type for all your models, ESCs, charging plugs and parallel charging boards.The fun part is they are customizable and you can make them yourself. They support up to 6 Amps and are widely used in different RC receivers. They perform best in noncontinuous usage rather than the continuous power supply. XT30 Connectors I like the XT60 because it is easy to solder the leads on. Once the soldering is done, the plastic cover helps protect the lead ends. The plastic cover is the grey part on the connector. It spans on and off pretty easily with a pair of pliers. Their latest connector can connect the ESC with the battery; They also connect to the LiPo balance charger. So their batteries now have only one connector that connects both to the charger and the balancer. Bad LiPo battery connector types increase resistance and prevent power from being supplied/used efficiently. You would want to choose the mating rc connector type with care.

Arrma ARA390292 IC5 Loop Connector — Herts RC Models

But for better measurement, you should use them under 35 Amps. In addition, it also works on lower amps than that. EC2 Connectors Got a high-power drone? Then this connector is for you. With a load capacity of 150 Amps, the XT150 is the Godzilla of the XT family. It comes with an attached wire and uses 6mm pins to connect with the lipo battery. Cool isnt it! Question: Can an EC5 male plug be connected to a car with an IC5 female plug? Answer: Yes. You can connect directly without using additional adapters or changing plugs. One of the highest performers of lipo battery connectors is the AS150. It has the capacity of running up to 200 Amps continuously. This one is one of the most famous connectors for Lipo batteries. The EC series are widely used in RC vehicles and aircraft.Batteries with EC5 plugs are like most batteries on the market, they have separate wire plugs and balance plugs. This means that these batteries are suitable for any RC car or electrical equipment, as long as the voltage and size match. You just need to replace the plug without having to buy another battery.