W4 Battery Retain Brackets

Product Information

Install over the utilities passing through timber studs. Prevents piercing water pipes or electrical cables with nails/screws. Unique integral metal teeth press into timber. No nails required.

Strap Bracket Strap UK Vintage Light Fixing Ceiling Rose Strap Bracket Strap

For butt jointing timbers of a similar cross section with no need to drill and screw which causes weak points. Universally designed insulation retaining disc available in an 80mm diameter. Featuring a firm grip design that will not move on the wall tie; retaining discs are clipped on to wall ties either before building or in situ.For all applications to enhance bolt performance by reducing timber rotation and joint movement. Place between timbers on an M12 bolt prior to tightening. Fix on each side of the timber joint using 30 x 3.75mm square twist nails in all available nail holes. Drive the post support into the ground with a sledge hammer and the 3-fin steel spike will provide secure anchorage. Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. Used to attach and support roof trusses from girders & trusses. Higher qualified load performance and increased hole centres to spread load over greater area.

Sabrefix Rolled Edge Restraint Strap Twist 5 Pack - Screwfix

Horizontal and vertical straps designed to be used when connecting timber floor and roof systems to masonry walls. To allow for thermal movement of a structure, debonding sleeves are fitted to the movement ties to allow movement whilst supporting horizontal or vertical loading. Used to allow masonry to expand or contract. Suitable for vertical movement joints. Designed for use with a debonding sleeve. Supports multiple trusses from primary girder, purlin to beam connections and main trimmer joists. Used for joining timber to timber, masonry or concrete.Solves the problem of rotted posts that have broken off at ground level but are in sound concrete base. Knee rail straps are supplied flat or with one 90 degree bend which can then be installed , bent into shape and secured with nails. Use under bolt head and tail nut. Spreads the load of bolt head around the hole, thereby avoiding fretting and timber damage.