Harris 102032400 Seriously Good Exterior Woodwork Shed and Fence Roller Frame and Sleeve, 4"

Product Information

If you’ve never painted a fence before, it can seem like a difficult process. But thankfully, this step-by-step guide on how to paint a fence with a roller will make this DIY project so much easier. If your fence panel is still wet when you start painting, the paint won't adhere properly to its surface. This can cause unsightly bubbles, and the paint simply won’t do its job properly. Whilst you can paint a fence with a roller, you’re more likely to get an even and attractive finish when using either a good quality paint brush or an airless paint sprayer if you have the budget. What’s the problem with using a roller to paint a fence? Once you have a clear space around your fence, think about covering the surrounding vegetation (essential if spray painting) and laying down dust sheets or plastic sheeting along the bottom of the fence to catch any paint drips. Having the best tool for the job is the first step towards achieving a perfect finish. We are going to breakdown some of the various circumstances you will need a particular roller and give our recommendations for the best paint roller for the job at hand. Best Paint Roller For Smooth Surfaces

To finish your fence prep, give the fence a rub down with sandpaper to get rid of any rough areas. This is not so important for rough-sawn fence panels, but if you have a smoother timber fence, i.e. a slatted fence, then make sure to rub down for improved adhesion. While beginners may have the misconception that one only needs a roller and a paintbrush to paint a fence, other tools are necessary to make the fence and new paint smoother. Some of these tools include: Paint and Primer Before starting, you need to protect yourself. Wear all the gear mentioned above to avoid getting paint on your skin, eyes, and mouth. You have to prioritize your safety before anything else. 2. Prepare EverythingFinally, if you have concrete – or non-wood – posts that you don’t want to get paint on, mask off with tape and paper. A simple tip if you have slotted concrete posts is to lift out the panel completely and paint it in a separate prepared area. How to Paint a Fence: A Step-By-Step Guide Start cleaning brushes and rollers to ensure the paint comes off easily and wipe down any plastic sheeting, to store it away ready for your next DIY. If you have paint left in the tin, add a label to say when you used it and ensure the lid is clean(ish) and on tight to stop it oxidizing. Store it out of direct sunlight and off the floor. A peeling and chipped fence paint is an eyesore. It makes your home look neglected. A fresh coat of paint will make your fence look new again and help you maintain that well-kept appearance. It Protects Against the Elements

For a garden fence project, you’ll want to select a roller that’s specifically designed for use with an extension pole. It will be easier for you to reach the top of the fence. Also, you might need more than one roller. Paint SprayerDo you have an old, peeling fence that’s starting to look a bit dated? If so, painting the fence is a great way to give it new life! But before you start, here are tips to consider. The best paint to use in this scenario is a specialist fence or exterior paint. There is also the option to choose from stain or paint, depending on what type of finish you want. Put on safety glasses and gloves to stay safe while working, then use a hammer, screwdriver, or drill to remove nails or screws and replace any broken fence boards. New fence boards should be attached with rust-resistant, exterior-grade nails or screws. Also, if you have plants in the surroundings, cover or remove them in the meantime to prevent from splashing paint onto them. You may also use protective sheets or newspapers to protect your plants. 3. Prime Your Fence Sandpaper is needed for preparing the fence’s surface before painting, particularly in rough-sawn timber. It will help remove any peeling paint or dirt and make rougher fences smooth so that the paint will adhere properly. Safety Gear

A tarp or a plastic sheet can protect the surrounding area from paint spills. It’s also helpful for protecting the ground from any dirt or dust produced when you’re sanding the fence. Ties Bonnet says "If you have a brand new fence they often come pretreated, so all you will need to do before you paint is make sure your panels are clean and dry. Older fences, however, may require some sanding down to help remove the previous paint layer for a more even finish." 4. Apply your first layer of primerPaint brushes are ideal for detail work or narrow and hard-to-reach areas of the fence that a roller won’t cover.