Beyerdynamic DT990 PRO Open Dynamic Studio 250 Ohm Headphones

Product Information

I am not going to recommend the Beyerdynamic DT990 Pro. It is just too broken. Even though EQ helped a lot, it is still an inefficient headphone with high distortion. If you have one, use my EQ and comment on how you like it. Otherwise it is a pass with or without EQ. Let's hope we can find a headphone as comfortable as this but with much better engineering. i am all ears and eager to learn. im still excited to hear what these cans can really do. i know they should be really amazing but i just need some guidance After comparing these two headphones side by side, we found that the Beyerdynamic DT 990 PRO 250 Ohmsis a better choice than the DT 990 PRO 80 Ohms due to its superior sound quality.

Beyerdynamic DT 990 PRO review | MusicRadar

For decades now, the Beyerdynamic DT 990 PRO has been a dominant headphone among studio professionals. It delivers detailed audio and extremely transparent sound, which is perfect for studio applications. Notice how 250 ohm is the minimum impedance. Close to tuning frequency of the headphone, it shoots up to 350 ohm so your headphone amp needs to also have a very low output impedance as to not impact the frequency response of this headphone. Heaven knows you don't want to mess up the response of this headphone any more than it already is! You deserve the best audio experience possible. Take this opportunity to explore our products in detail to help you make the best choice. If you have a question, reach out: we're here to help. Alright. I did further testing. I was using spotify and I now tested with some flac files instead. Left driver clips as well but not as bad as the right side. Maybe because there are a lot more happening in the right channel in the song. SoundID software has a switch to flip L/R channels and the bad clipping does flip left and right. I can find a lot about the beyerdynamic dt990 250 ohm on the internet and from that I concluded that they are very solid headphones for the price. you do need an amp for that, of course.I must say, I was surprised how this finally salvaged the headphone sound. I am listening to it as I type this and it almost sounds "normal" in a good way! Mind you, if you turn up the level too much, the warbling sound comes to haunt you but that is likely not your everyday level. Note: The measurements you are about to see are preformed using standardized GRAS 45CA headphone measurement fixture. Headphone measurements require more interpretation than speaker tests and have more of a requirement for subjective testing as a result. In addition, comparison of measurements between different people performing it using different configurations requires fair bit of skill. So don't look for matching results. Focus on high level picture. Listening tests are performed using RME ADI-2 DAC and its headphone output. Impedance does make a difference in how the amp interacts with the headphones, but it doesn't make nearly the same level of impact as sensitivity. The sensitivity is roughly the same for all versions of the DT990. You can mess with that shelfing filter (Band 5) to your taste. On some content I wanted it higher, on some others, less. The latter is what I am showing here. However,the DT 990 PRO 80 Ohms isideal for devices with low amps, like mobile phones, laptops, portable music players, and other portable devices.

Beyerdynamic dt990 32 ohm vs 250 ohm? - Head-Fi.org Beyerdynamic dt990 32 ohm vs 250 ohm? - Head-Fi.org

Since it's in one side only the headphone is likely the problem but I'd also guess the headphones aren't very sensitive since they are 250 Ohms so it wouldn't surprise me if you are clipping the Behringer.The Beyerdynamic DT 990 PRO 250 Ohms delivers better sound quality than the DT 990 PRO 80 Ohms. Microphone sound quality: The DT 990 PRO is an open dynamic headphone of exceptional quality suitable for the most demanding professional and audiophile applications. What are the Differences Between Beyerdynamic DT 990 PRO 80 Ohms and 250 Ohms? OLYMPUS DIGITAL CAMERA The very early (high impedance ones) even had zener diodes in anti-series to prevent maximum excursions.

DT990 Pro (250 ohms) underpowered? | Audio Science Is my DT990 Pro (250 ohms) underpowered? | Audio Science

I am always hopeful that I can fix headphones with EQ but my first two tries last night were met with failure. This headphone's main saving grace is its rather good spatial qualities. Alas, fixing the high frequency peaks and levels by eye killed that aspect and still left the nastiness that was in there at times. Any attempt to boost the bass frequencies resulted in nasty bass distortion and worse warbling sound per above. So this tells you the problem isn't in one channel or the other of your phones. Just depends upon which channels gets a little louder first. The UMC gear is all very under-voltaged as solderdude said. If I do really need a headphone amp, any recommendations? (I use the headphones for mixing, I'm pairing it with Sonarworks SoundID)Thanks to the Tesla technologydeveloped in Heilbronn, the DT 1990 PRO offers even finer resolution with precise and powerful bass. The PRO flagship also sets new standards in terms of wearing comfort and workmanship. I cannot afford a new interface right now. Is the Atom neutral/transparent? I don't want the sound to be colored to keep the neutral EQ from sonarworks soundID. The reduced weight of the diaphragm and moving coil result in a similar pulse characteristic as electrostatic headphones, and in combination with a carefully tailored frequency response offer a natural and balanced sound. but I can hardly find anything on the internet about the dt990 80 ohms. my preference is actually for this one because then I don't have to spend that much money on a dac / amp. but i'm afraid the 80 ohm sound quality is much lower than the 250 ohm

Beyerdynamic DT990 Premium review | What Hi-Fi? Beyerdynamic DT990 Premium review | What Hi-Fi?

The pads felt hard at first but after just a couple of hours of use, they became more comfortable. Combined with light weight of the unit, they are nice to wear. Despite having the same frequency response range of 5Hz-35 kHz, these headphones have a great sound delivery with an excellent sense of imaging, depth, and soundstage. As a result, they are perfect for any gaming session and studio mixing, monitoring, and mastering. How about waiting until next month? Fiio is releasing the E11 which won't cost more than 60 or so, and is mentioned to handle 300ohm loads. I'm thinking of getting a 990/32ohm for when I'm at work and the E11. I had the 600ohm. It took all of a few seconds to want to rip the DT 990 off my head as I always start with female vocals and this headphone shred the vocals to pieces. And proceeded to drill into your head with those shards! This thing is so bright that it brought high frequencies resonances that I did not even think were in the music! This stood out even more because there is little sub-bass energy. The peaking around 150 Hz provides a bit of help there but also can sound a bit boomy on some content. The DT 990 Pro comes with soft velour earpads, as well an adjustable padded spring steel headband for maximum comfort making them ideal for long sessions.Often, investing in excellent sounding headphones means that you may end up spending a little more than you had bargained. But every once in a while, you may find something that does not cost a lot and still delivers impressive audio. The Beyerdynamic DT 990 PRO is one of those headsets. Despite not having the trendiest appearance, it provides a unique and powerful signature sound that is sure to impress you every time you place them on your head. In this Beyerdynamic DT 990 PRO 80 Ohms vs. 250 Ohms comparison, we tell you what you need to know about each of them and the different features which make both an attractive option. The cups are round and large making for easy fit not only around your ears but also the measurement gear. I have never had a headphone so easy to mount on my fixture to measure. Both the DT 990 PRO 80 Ohms and 250 Ohms have the same durable build qualityas they are almost entirely made from high-grade and durable plastic, except for their steel metal headband that suspends the ear cups, providing a secure fit. The ear cups are adjustable, replaceable, and consist of soft memory foam padding wrapped in velour for optimum comfort when playing games or listening to music for extended periods. In addition, they come with a straight tangle-free cord attached to one side for efficient frequent adjustment. Performance/sound quality: