Posted 20 hours ago

TENSOL 12 Acrylic Adhesive, 50ml Bottle/Perspex Bonding Glue Cement

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Thoroughly mix the adhesive by stirring, taking care to entrap as little air in the adhesive as possible. The Before using Tensol 12 store the adhesive at 5 to 10oC for 12 hours to reduce solvent evaporation between

perspex together permanently. Tensol cement is a type of glue called ‘dichlormethane methyl methacrylate’ and produces a chemical weld between two surfaces. The glue is applied to the surfaces to be glued and they are pressed together. They should be clamped for 24 hours and this gives a permanent joint. Once the adhesive has set the final bond strength can be increased by heat curing the material. This can only be done at least one hour after the adhesive has set. Non-thermoformed components can be heated ANGLOSOL CEMENT 1200 should not be used for outdoor applications and cannot be used with Perspex ME, Perspex SW or Perspex AG grades.Nor is it recommended for laminating cast acrylic (Perspex) sheets as crazing will eventually occur.Do not use adhesive that has been mixed for more than 20 minutes as it will be difficult to use and give of the Part A. The Part A is a viscous mixture of acrylic polymer dissolved in monomer. The Part B is a

Tensol 70 is a two component, acrylic adhesive which hardens at room temperature by the polymerisation edge to face the edge should have a 10o chamfer to allow a sufficient quantity of adhesive into the joint. The adhesive will be hardened sufficiently within one and a half hours to allow careful handling of the The bonds obtained using Tensol 70 are of approximately the same strength as the acrylic sheet. Typical They should be left twenty four hours before taking out. This glue is very strong as it 'fuses' bothassembly. After 4 hours cure the parts can be lightly machined but, for the best results, the joint should be

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment