Posted 20 hours ago

Todays Tools Plumb Tub

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

PVC and chrome shower trays are raised shower trays. The tray is made from PVC, while the legs are made from chrome. PVC is a tough and durable material that’s easy to clean and has an incredibly long lifespan. Shower cubicles are used to keep your space protected from splashes during showering while also providing your bathroom with a stylish touch. Our comprehensive range of shower enclosures boasts everything you need to install a fresh new shower cubicle or renovate a tired old one. Are shower enclosures adjustable? Once the shower tray has been fixed in position, connect up the trap and waste following the manufacturer’s details. Tiling and Sealing Around the Shower Tray If you’re buying a shower tray to go with a shower enclosure you already have, the tray shape must match the shape of the enclosure. This is because the tray and enclosure, when joined together, must form a tight seal to ensure water can’t escape. If you are simply replacing an old shower tray with a new one it’s best to swap like for like e.g. same size and style with the waste in the same position, however if you want to fit a larger more elaborate tray try to match the waste positions closely.

Installing a shower tray on floorboards or chipboard: the plumbing pipes and waste will likely be below the floorboards, so you can fit a low-profile or flat, flush-fitting shower tray. These trays are much easier to install because there is no adjustment to the height. Before placing the tray down in place, we first replaced the sections of flooring that had been removed that would sit under the shower tray. At the end of the tray we also created a trap door. This was simply a section of flooring that could be easily unscrewed and removed so that we could access the waste. It's important to clean a shower tray regularly to prevent soap scum, limescale and grime from building up. Here are some top tips for keeping a shower tray clean and looking its best: This may be caused by movement in the base. It can also be caused by poor application of the sealant. If so, remove the sealant and redo it taking care to ensure that the joint is clean and free from debris and that the sealant fills the void between tray and tiles. Pooling of water in the shower. When connecting into your main drainage point, in most cases it will be a 110mm plastic/PVC soil pipe as we are here. This is a fairly easy job as you can use a strap on boss.If you are installing your shower tray over a solid concrete floor then you may be best going with a raised shower tray as this will avoid having to chop down in to the concrete to allow space for the waste. Turning a low-profile shower tray into a raised one by using a shower tray riser kit is possible. This consists of adjustable legs and clip-on side covers which conceal the legs and pipe work. These covers can be removed easily as and when needed to gain access to the pipes.

On first inspection of the walls it was apparent that many of the tiles had come loose also so all of these were also removed. In this example we will be replacing an old 900×900 quadrant shower tray with a new 900×900 low level quadrant shower tray. This way you can then use the existing waste, minimizing the amount of work needed as repositioning a waste pipe can be a nightmare as you never quite know what’s going on under the floor! Remove old tray, inspect the shower area and repair any damage As we have mentioned installing a new shower tray with the waste in the same position as the old one should minimize potentially a great deal of work.Another way to create a walk-in shower is to build a wet room. In a wet room, the whole floor acts as a shower tray. To achieve this, a sub-floor can be constructed from WBP ply, but the easiest method is to install either a ready-made sloping shower tray tiled over or a giant pre-formed tray that covers the entire floor and doesn't need to be tiled. Either way, the floor is all on one level, and there is no visible shower tray lip. If you're buying a shower tray to go with an existing shower enclosure, the two parts must be the same size and shape. This is so they can form a watertight seal when they are joined together. Once the tray has set and is fully secured, the waste can now be connected up. In this case we were using the existing waste so we pushed the end of the waste pipe up under the floor (with the screw cap, washer and tapered rubber seal in place) and using a torch, located it within the connection on the tray’s waste trap. Repaired sections of wall retiled with ceramic tiles Position tray in place and mark access hatch and waste

Installing a shower tray in sand and cement or concrete floor: the plumbing pipes and waste will likely be exposed above the ground, so you'll need a raised shower tray or a low-profile shower tray and a riser kit. This job involves adjusting the shower tray feet to the correct height and ensuring the tray is level.That being said though, if it’s a new install and you have to get a full waste pipe in place to carry water to the main drain, this may be something you can do along with the rest of the work. Acrylic-capped stone resin shower trays are made from shards of stone bonded with polyurethane resin. They are moulded into shape and polished before being covered in an acrylic finish. This material is durable, easy to clean, scratch-resistant, and warm to the touch. And unlike acrylic, it won’t bend or warp. Before you start, you need to make sure that the floor beneath the tray is capable of supporting it. It needs to be completely firm, with no flexibility as this can cause problems. Mark out where the tray is going to go and replace any floorboardsin this area with marine plywood that is at least 18mm. Step 2 - Cut Access Hatch Shower trays are available in a variety of materials, which all have different qualities as follows:

If you’re happy with the general fitment, you then need to establish the best possible route for your waste pipe if this isn’t already in place. Attach the waste to your tray then connect this to the trap. Step 3 - Level the Tray Some shower trays are relatively easy to install for a competent DIYer, especially if you’re replacing an old tray with a new one that’s the same size and shape. However, a qualified plumber may be required for more complex jobs. A bathroom’s size and layout will often dictate the type of shower tray and shower tray sizes that can be installed. For example, space-saving square and quadrant-shaped shower trays best suit small bathrooms and ensuites. But larger bathrooms can accommodate more spacious rectangular and offset quadrant shower trays. Also, consider if there’s enough space in the bathroom for the type of enclosure door you want. For example, a hinged door needs space to open, while a sliding door doesn’t. Likewise with a floating timber floor, you can almost guarantee that there will be a supporting wall or other obstacle right where your new waste needs to go!Fitting or installing shower trays can be a DIY job but the utmost care must be taken to ensure that the tray is both fully sealed, waterproof and also totally level on the base it’s sitting on once it’s in place. Simply drill a 57mm hole in the soil pipe, coat the inside face of the boss with silicone and clip it in place. To find out how to fit both a raised or flat shower tray read on below. Should I install a raised or flat shower tray? This is caused by the tray not being installed level. The tray will have been made with a fall on the internal surface so that water will drain correctly to the waste outlet. Reinstalling so that the tray is perfectly level will solve this problem. Creaking shower tray. To fix your shower tray firmly to the floor, the best stuff to use is a strong construction adhesive. Clean the base thoroughly first to remove any grease and grime and then spread it evenly in beads over the base of the tray.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment