Joined in 2023 
82 
63 About this deal
This feature is of course optional, and its use is a matter of personal preference. Display rotation and toggle Please note - This feature is experimental, and may not always work as expected. If things do not work as expected after enabling this option, please disable the option. *** Important note - please do not make any other changes in this location, other than what we describe above *** Most Chromebooks meet the minimum hardware specifications we recommend for use with products based on the DL-3900 chipset.
Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro. The DL-6950 chipset has higher recommended hardware specifications which may not be met by some Chromebooks, which in turn may result in lower than expected performance. For best performance, Plugable recommends using our DisplayLink-based products with Chromebooks that were released in the year 2020 or later. At the rear of the hub are most of its ports including four USB 2.0 ports with transfer speeds of up to 480Mbps. These ports are best for connecting your low-frequency USB devices such as printer and mouse rather than transferring files. Also, they do not support fast charging. You will also find a single HDMI port and a single DVI port at the rear. When both are connected to your monitors, they offer resolutions of 2048 x 1152 at 60Hz. Completely close the application that is affected by the behavior, and then restart the applicationIn ChromeOS, this feature is also known as ‘Night Light’ → https://support.google.com/chromebook/answer/9145848?hl=en This is of course an optional feature, and is not required to use DisplayLink devices. However, this option is useful in certain situations, such as when only DisplayLink-connected displays are connected to the host Mac. Automatic startup The cause of this behavior is still being investigated, however in our experience making a small change within the ‘Notifications & Focus’ preference settings can help. In the upper left corner of the settings window, in the search box, type "lid" then select Change what closing the lid does from the search results
Follow the on screen instructions to install the latest graphics driver, select the "Custom" or "Advanced" installation option if available, at the custom installation screen select the option to "Perform a clean installation" Your modem, and the connection it establishes to your ISP—whether through coaxial cable, fiber, phone lines, or long-range wireless—essentially marks the point between the WAN and the LAN. The connection your modem makes to your ISP is the WAN, and any devices you connect through your router behind that modem belong to the LAN. Link RateOne of the most accurate ways to benchmark network performance on a LAN is by using iPerf . To more effectively benchmark network adapter performance, it is best to establish a point-to-point connection between two PCs, rather than connecting through a router or switch. Configuring iPerf Most of its ports are located on one end to reduce desk clutter but you will find a couple of USB ports on the other end. Still, you won’t have to worry about a bunch of USB cables messing up your workspace. Mac laptops running macOS 12 Monterey or newer can be used in one of two ways when used in conjunction with a DisplayLink-based product. Test to see if this has resolved the unexpected behavior, and assure that your Ethernet is now working. NVIDIA also uses a unified driver installer for most of their discrete desktop and notebook graphics controllers.
The below guide is an advanced troubleshooting step, and we do not recommend doing so unless you are comfortable manually altering files on your Apple product running macOS. You may not be able to perform the below troubleshooting step if you are unable to execute administrative credentials on your laptop. Please reach out to our support first if you do not wish to attempt the below instructions. You can do so at Plugable.com/Support How to delete a specific Ethernet adapter from your Network devices on macOS
Features / Data Link Protocol
When DisplayLink devices are used in conjunction with Apple Mac systems that have an Apple M1 or M2 processor, display rotation must be done from within the DisplayLink Manager Application and the host Mac must be running macOS 12 Monterey or later (display rotation is not available on M1 Macs running macOS 11 Big Sur). This will fully erase all of your Network configuration! Do not skip any steps, and proceed only if you are comfortable with each step! Windows 7/8.x—Select Recording Devices. The Sound window will open with the Recording tab highlighted B. This functionality is supported with devices based on the DisplayLink DL-3xxx chipset, DL-5xxx chipset, and DL-6xxx chipset. However, it is important to note that on DL-6xxx chipsets this functionality is limited to DisplayPort video outputs only. It is NOT supported on HDMI video outputs via DL-6xxx chipsets. System sleep in display-closed mode
Great Deal 
New Comment