Shelly 20210 EM Schalt-Messaktor Wi-Fi

Product Information

This section is dedicated to plugs and strips with energy monitoring, and devices which report their own energy consumption. Kasa HS300 ¶ Develco Smart Plug Mini (Develco Frient SPLZB-131) → https://github.com/zigpy/zha-device-handlers/issues/857

Never attach a clamp on an energized wire while it’s not connected to the Shelly! 4. Attach wires ¶ The digital meter of the solar installation only sends updates twice a day to a portal of the installer. Next to making our lives easier by automating the boring stuff, many people invest in home automation to save money by reducing energy consumption.

The professional monitoring and control solution

It might take a few minutes for data to start coming through but you should start to see the energy dashboard populating with your current usage: Standing Charges

A clamp is hooked around the incoming wires for each of the phases. These monitor the current (in Amps) flowing through the wire and its direction. The Square D edition of the Sense smartphone app is used to monitor the Wiser Smart Energy Monitor system. It is an easy to use app with almost all the essential features to monitor and evaluate which devices are making problems for you in your electricity bill.Also, we recommend taking a picture of your consumer unit. You can then compare against the product instructions to ensure it's a compatible board. Energy Monitor Install Note, this product also leverages z-wave. As such, make sure you have a z-wave network! This also means, it works completely local, with no internet dependency at all. With Shelly you can control your lights, garage doors, curtains, window blinds, or other appliances, as well as trigger actions based on certain conditions. Monitoring energy usage for critical equipment (such as a basement sump pump) provide an important safety net. It ensures your home does not become flooded resulting in costly repairs. Safety

Don’t worry, eventually you’ll see your data appear here, give it some time. There is no data to show. It can take up to 2 hours for new data to arrive after you configure your energy dashboard. After a few hours, data will start to appear BlitzWolf BW-SHP13 (OEM version of Tuya TS0121) → https://github.com/zigpy/zha-device-handlers/issues/605 All those applies to most Zigbee power plugs or other Zigbee devices with integrated energy meters: Do the same for the other 2 “Energy” meters and and the “Energy Returned” meters under the “Return to Grid” section. As you can see from the above photo, I'm using a single current clamp to monitor the incoming live feed. Our meter tails are not coloured, so figuring out which was the right feed to monitor and which way round to place the current clamp took some trial and error. However, once I got positive (rather than negative) readings within the app, I knew the device was installed just how I needed it.All products are recommended to be installed by an electrician. However some can be DIY installed, based on the company's manual. In my sensors.yaml file I have created the following sensor. My current unit rate for electricity is 27.35p per kWh. - platform: template