Vitrex TAS100 Tile Adhesive Scraper

Product Information

Use adhesive-removing paste– if you’re dealing with a tougher adhesive and water doesn’t seem to work, try a good brand of adhesive remover. Opt for a formula that is either specifically made for ceramic tile adhesive or one with a soy base or citric acid contains. These options are with low VOC levels which means that they require less ventilation than their chemical counterparts. If required, remove the tile you are replacing by using a hammer and chisel to carefully chip out the tile. Before removing the tile, you may find it easier to first remove the grout from around the edges. We recommend using the Carbide Segment blade for fast and effective grout removal. Learn more about grout removal. Protect yourself– the task will result in a lot of dust and tiny particles that can harm you if inhaled, so it’s best to wear a protective mask, gloves, and goggles. The Rigid Scraper Blade is a multi-tool accessory that’s designed for a range of uses, including removal of floor coverings and silicone. Removing tile adhesive is just one of the many uses of this versatile blade. Offering fast and effective adhesive removal, this blade will instantly turn your multi-tool into a powerful scraper. Delivering 4200 blows per minute to help you work effectively and efficiently on the toughest of jobs, and features a built-in safety clutch to protect the drill from overload.

The safety gear, PPE (personnel protective equipment) should include goggles for eye protection, face mask for dust protection, cut resistant gloves to protect your hands and safety footwear to protect your feet from falling tiles and sharp broken tiles that you may stand on.Great Performance– This tool is great for those on a budget and don’t want to spend much on a tool if they are not going to be using it that often. As for the actual tile removal process, you can do it manually or by using power tools. If you are planning on removing tiles manually then you will need a suitably sized metal chisel, these come in various sizes, and a hammer. A small sledgehammer weighing 2 – 3 lb in weight is more than adequate for tile removal. If you have already separated the tiles from your bathroom walls, you can use an adhesive remover to get the rest of the glue off. You will need a putty knife, hammer, chisel, gloves, plastic sheets for protection, citric- or soy-based adhesive remover for tiles. Before proceeding with the actual steps, make sure to leave a window open while working if your adhesive remover is with high levels of VOC (volatile organic compounds). Weighing in at just 8 lbs you’ll be able to keep working for longer, and with no electric cords to get in your way when you’re working, that’s a bonus too. What We Like: The Bosch 11321EVS demolition hammer is a heavy duty, corded, variable speed, SDS Max power tool that is designed for tough hard working environments.

If you’re wondering how to remove ceramic wall and floor tiles, the best tile removal tool for the job really depends upon what type of surface you are removing the tile from and also how much tile removal needs doing.Built In Anti Vibration– With the Bosch built in anti vibration system you’ll be able to work harder for longer. Cranked Chisel– This angled floor and wall tile removal tool is set at the perfect angle for removing tile without causing damage to the surface under the tile. The best approach is to edge your chisel in, in a way that you keep it as flat along the wall as possible to prevent the chisel from digging into the drywall and causing damage. When Eddy is busy, hard at work, you can imagine it can and does get a little noisy as the tiles are being broken up, you can expect a noise level of 80 decibels when working so, as with all power tools that emit noise, using ear protection is essential. Get your tool of choice– remove old tile adhesive with the help of a hammer and chisel, but these tools are more suitable for the fine cleaning of specific sections. Instead, opt for a scraper or grinder to cover a larger area.