Blue Diamond Screw Tent Pegs - 20 pack, Purple, One Size

Product Information

In fact, the right tent stakes should be able to hold your tent through rough conditions including heavy rains or wind, if your tent is designed to do so. In the buying guide below, we’ve outlined some of the key features to look out for when choosing pegs from your camping tent. In fact, as far as comparisons go, it is unfair to really put all but one GroundGrabba into the tent peg category because ours hold up to 7x more than other types and brands of screw-in tent pegs out there. We are the market leaders when it comes to holding power. When choosing the best tent pegs, the surface area and length are important features to focus on. Typically, the holding power of the pegs is directly proportional to the length and surface area. Screw In Pegs are a galvanised 200mm-long shaft that accepts an included 5mm hexagonal driver, and both standard drills and impact drivers for great drilling forces. While looking a little agricultural, the cleverly designed wires loop and hook remains on the peg shaft and can be used to attach a guy rope, or to hold a tarp down directly to the ground. A great design idea sees the hook pointing downwards so as not to promote toe-stubbing. Although the Screw In Peg performed faultlessly in harder soils, the performance in anything softer is not much different to a standard peg. The finer flutes on the shaft clogged with dirt, rendering it of little use for ground-holding ability.

The main reason for the drill driven tent pegs being so good is they can be used in hard ground. This means crushed limestone, gravel or even compacted dirt is no issue at all. No doubt there are a couple of best screw in tent pegs, but for us the Bunnings Whites option works just fine. Simple, easy to use and strong as Should you get a set of screw in pegs?A huge number of people travelling these days carry 18V drills, and winding a few tent pegs in and out is easy work. These can double up for winding the caravan or camper trailer legs down, repairs and maintenance on your gear and don’t take up much room. Or, you could use our new GroundGrabba Junior which has threads that do not protrude out from the shaft making them easier to screw into harder grounds. But be awaare they do not hold the same loads as the Pro series. Your tent must be secured strongly enough to withstand the roughest conditions such as howling wind and driving rain. You may also be camping on a hard pitch with gravel or stones, and require the best tent pegs for the job of pegging out.

Knowing how to choose the best tent pegs for your needs is highly crucial. You want your tent pegs to offer adequate stability and hold on to your tent to ensure it performs the way it should.Shaped pegs – these pegs often have a V-shaped or Y-shaped design, created to provide a greater surface area for gripping into the ground, as well as easier penetration into soil Blue Screw offers two plastic pegs at 310 and 580mm long. They are ideal in sandy environments with exceptional high-hold abilities. Blue Screw suggest its pegs work well in snow, sloppy mud and underwater too, which would be ideal for a boat mooring. The rope hook on top is large enough to attach multiple guy ropes. This product is aimed squarely at sand and soft soil use; forget trying to twist it into hard ground – it simply won’t work. As the Blue Screw is so flexible and long, you need to ensure it’s wound all the way in if pulling it at an angle, but works equally as well if screwed in line with the rope pull instead of at an angle, which could bend or twist the shaft beyond its limits.

We now have a GroundGrabba Junior for lower loads and harder grounds available with great holding power but not to the same degree as our Pro, Pro I and Pro II. Don’t take our word for it, see what RV Daily says div>