MEAZOR 3D Laser Distance Meter, 2D Floor Plan Scan, Free App, Laser Measure with Bluetooth, 131ft Laser Measure, ±1/16-inch Accuracy, 6-in-1 Multifunction, Mutiple Units M/Ft

Product Information

After one minute, the laser measure goes to sleep mode. This requires exiting the laser measure mode by pressing the power button and restarting the laser measure. This is way too short and should be user-definable even if it affects battery life. Level – This mode works well, although you have to start by placing it on a level surface to calibrate it. It is possible that your calibrated surface is not perfectly level, which will result in all of your measurements being off. I suppose you could use an actual bubble level to help calibrate this tool, but that seems to kind of defeat the purpose, doesn’t it? OUTSTANDING 3D FUNCTIONS: The VERY FIRST laser measure that allows you to move freely in any space and auto snaps every edge of the room. Supported by its 3D Displacement and 3D tilt Functions Laser Measure – This is the basic mode that uses the laser to take a single real-time distance measurement. A consumer may not have the skills to use all the Meazor features or the app features. It is more suited to professional use or those that understand its functions.

The 650mAh battery requires a 5V/1A charger and a USB-A to USB-C cable. We initially had issues as it will not charge off a USB-C to USB-C cable attached to a USB-C PD 2.0 charger. Charge time is 132 minutes, and it is good for 30 days standby or about 16 hours use (we will take their word for that). Pro-Laser Area Mode – This will calculate the area of a rectangular area based on two measurements. This mode of operation worked well with no issues. Laser Measure – This mode worked well with no issues. Being able to use the foldable stand was a nice benefit, especially for vertical measurements because the device is stable and will stand up that way without the need to hold it in place, as long as the surface is flat. The device was able to measure beyond the stated range of 82 feet, and when I compared the length measurement to my Bosch GL M, and at 80 feet, the measurements were within 6″ of each other. A shorter measurement of about 6 feet showed that the two tools were within about 1/4″.Currently, V1.7 for Google Play and Apple App Store the App adds value to the manual processes. It also connects via Bluetooth and is for firmware upgrades. This is my simple room map in AutoCAD which would allow me to develop a more detailed drawing of the room. Since the imported lines are not perfectly straight due to measurement inaccuracies, I’d use AutoCAD to modify the lines, or use the scan lines as a template to develop the drawing. What I like

Curve Scanner – This mode also doesn’t seem very useful. It will capture a curved surface and allow it to be uploaded into the app, and you can export it to a CAD program. It will give a map of the curve and provide the total length of the curve, but it won’t be accurate enough to build anything with it. I tried to use this feature to do a continuous scan of an entire room, but the resulting images were not very useful. Again, there might be a use for this mode that I can’t think of. Scale Ruler – This mode allows taking measurements using the rolling wheel and will automatically convert the measurement into different English and metric units or different scales. This mode of operation could be used to convert a measurement on a scale drawing with various scale settings to a different length (probably only useful for scale drawings with no dimensions or smaller items that would be up-scaled to a larger size). Point Scanner – This mode utilizes the tripod and allows creating a point by point 2-D scan of a room by rotating the device. The scan can be exported from the device to the app. Si prega di utilizzare questo prodotto per misurare quando la temperatura è compresa tra 0 ℃ e 35 ℃. Se la temperatura ambiente è troppo alta o troppo bassa, può ridurre la durata dei componenti del prodotto o causare malfunzionamenti del prodotto.

Read more about MEAZOR

Questo prodotto non deve utilizzare caricatori o cavi di ricarica incompatibili; queste azioni possono causare danni al prodotto, incendi, esplosioni o altri pericoli. Please note that this is a pre-release unit, and not everything is fully enabled. The beauty of this device is that firmware upgrades can fix any minor bugs and add new features. If you select metric, the laser measure defaults to millimetres. Many may prefer to set a default in metres. We were very keen to review the Measor as it seems to be an innovative ‘converged’ answer to any DIY or even professional designer. I showed it to my home designer, and he could see lots of use. Scale Ruler – This mode of operation doesn’t seem very useful for several reasons. First, you are using the rolling wheel to take the measurement, which is very inaccurate since you are eye-balling the starting and ending points. Secondly, most architects, engineers, or builders would not need to do this because most drawings have dimensions. There is no need to try to scale a drawing to find a dimension that is already on the drawing. Also, if scaling is necessary, is easy to do with a calculator since it is just multiplication. However, if you need to take a scale measurement on a map or some other drawing that is done to scale with no dimensions, then this would conceivably be a useful feature. The one other benefit of this mode is that it uses the rolling wheel to take the measurement, so if you set the scaling ratio to 1:1, then it will just report the length based on how far you rolled the device. I can imagine that some items may be difficult to measure with the laser and it would be easier to use the wheel. I’d like to hear if anyone can think of any uses for this mode that I’m not thinking of.