DJI Two Mini 2/SE Intelligent Flight Batteries

Product Information

The USB - Charger in the dron itself --> I noticed that 2 batteries wasl almost charged in the Power bank, while only one battery was charged in the dron itself. The first two LED lights are on but the third and fourth lights are not – the battery is between 38 and 50 percent

When a firmware update is ready, either that one or another, how do you update your Mini 2? Here are the steps to follow. The Mini 2 has among the longest flight times of any drone on the market, beating out the Sim Too Pro and the Autel Robotics EVO Drone, both of which can fly for 30 minutes. Even among DJI drones, the flight time of the Mini 2 is very impressive.The battery may feel like a tight fit in a new drone, or the tab button may be a bit stiff, so use enough force to fully release the battery before trying to slide it out. Whatever you do, don’t try to pry the battery out with anything, as you may damage the drone and/or the battery. Whether you’ll incur charges for the repairs and replacements depends on whether you have an active DJI warranty or the DJI Care Refresh service. If only the fourth LED light blinks three times a second, the Intelligent Flight Battery is charging at an excessively high temperature.

The Intelligent Flight Battery includes LED light indicators that tell you how far the battery charging has progressed. The first three LED lights are on but the fourth one is not – the battery is between 63 and 75 percent Cool down the battery after a flight, and then charge it. Otherwise, it may cause damage to the battery.The Two-Way Charging Hub will clearly spell it out for you with its four LEDs. Here’s what each LED readout means. If only the fourth LED light blinks two times a second, the Intelligent Flight Battery is charging at an excessively low temperature. If only the third LED light blinks two times a second, the Intelligent Flight Battery is overcharged, likely due to a high battery voltage. Once you exceed or drop below ambient temperatures, the battery charging behavior can become erratic. The gas and heat that accumulates in the battery could lead to the LiPo battery exploding. The battery could even cause a fire in a worst-case scenario.

All batteries will self-discharge to an extent, and that includes when they’re not plugged into a source of power. Discharging is more common with batteries filled with electrolyte fluid, but LiPo batteries can self-discharge as well. Hi, I am sorry to read about the loss of your drone. May I know if you have reported this case and filed a case number in our system? When the second LED light blinks three times a second, that represents an internal communication error and/or short circuit. The first three LED lights are on but the fourth one is flashing – the battery is between 75 and 88 percent Here’s how it’s done. Put the Intelligent Flight Battery into the Mini 2 SE, turn on the drone, and allow the battery some time to discharge.You might get just under 30 minutes, as that’s only the advertised time, but it’s still a good amount of time for a drone released in 2023.

The first three LED lights are flashing and the fourth light is on – the battery is between 50 and 75 percent DJI recommends sending the battery to them if you’re seeing the LED blinking pattern indicating a short-circuit error. If your battery doesn’t charge, you won’t see any LED lights when you plug in the Mini 2 Intelligent Flight Battery to the Type-C charging cable. You will also need to push the release tab on the battery to remove it from the charging hub when charging is complete. How Long Will a DJI Mini 2 Battery Last? I have some questions, probably is better to create a separate post -->but I Have no permissions , probably becase I'm a new user.Send an Online Repair Request to DJI and mail them your Intelligent Flight Battery. Short-circuiting