Youmile USB Programmer Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash + Sop8 Test Clip

Product Information

CH341PAR.EXE– self installing archive with multiprotocol interface driver ( this one is for the programmer mode) What do you recommend to progress on the CH341A SPI Programmer/Flasher procedure compatible with this recent ASUS Prime Z390M-Plus motherboard ? The chip is still readable and writable, so I guess is not totally fried (if so, peace, I'm just experimenting in a world I don't know at all, as said I fount this laptop in the trash). I did get it to work last night, although not using the CH341A programmer. Because of my weird arrangement, I wondered if it could be an issue due to noise on the SPI bus. I wondered if I could fix this by playing with the SPI speed. As the CH341A can't do that, I got my raspberry pi up, which has native SPI and flashrom support, and used flashrom to play around with the speeds. After a lot of trial and error, I got multiple good, verified reads and proceeded to modify the bin file, successfully upload and verify the flash chip, resolder the chip, and boot the device.

Nama-nama dan tombol menu serta submenu dalam software ini sebenarnya banyak yang sama dengan versi 1.13 dan versi 1.4.0 yaitu; if the Bios is still not recognized with Detect, then reverse the jumper in the mini SPI programmer and reverse the clamp on the motherboard’s Bios. There is no risk of short circuit normally. Mirror to the official CH341A drivers and used software, along with the documentation. I. RequirementsSoftware ini di buat untuk di gunakan dengan CH341A USB mini Programmer buatan Cina, kemampuannya untuk mengenali dan memprogram secara otomatis IC memori atau chip tipe;

Multiple flash chip definitions match the detected chip(s): "MX25L3205(A)", "MX25L3205D/MX25L3208D", "MX25L3206E/MX25L3208E", "MX25L3273E" This device allows a variety of options to program/flash SPI flash or BIOS chips but also other types of EEPROMs of type 24XX and 25XX which are found in various devices like routers, access points, videocards,… and is suited to program the SOIC-8 BIOS chips that are used in a lot of systems these days. 2) Adapter, cable or clip If in the end nothing works, the problem becomes even more insoluble. The motherboard may eventually be damaged. You are good at buying an old motherboard with the risk of having an obsolete card, or the same problem of corrupted Bios.KedarWolf - saving a BIOS in UEFITool does not convert anything, it simply adds .rom extension to whatever the original file extension is when you save or rebuild/save Like on Windows, using this method we can be sure that the programmer can communicate properly with the chip and we reduce the chance for corruption. All seems to be good in the above output. If you see a different hash, you first need to fix this before proceeding. If you’re worried about flashing your motherboard with an SPI Programmer, then this is the guide for you. Each step is explained in detail, with pictures. We’ll go over everything, from buying your Programmer to flashing your chip with Flashrom. By reading the datasheet, we can see that the manufacturer recommended to connect a 0.47 uF capacitor between RSTI (pin 2) and VCC for improved stability. There is none on this board. The CH341A is a USB-based IC for interfacing with SPI devices. In this tutorial, we’ll show you how to install the CH341A drivers and use the CH341A programmer to flash an SPI BIOS chip.