Rust-Oleum White Scratch Proof Floor Paint in Matt Finish - Chalk White 2.5L

Product Information

Application: Apply when temperature is between 10 and 30ºC. Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by brush, apply evenly following the grain of the wood. If rollering, use a short nap mohair roller. Two coats are recommended. Preparation: For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood, previously painted or varnished surfaces should be sanded before painting. Ensure new concrete is sound, fully cured and free from laitance.

Rust-Oleum Chalk white Chalky Matt Floor paint 2.5L Rust-Oleum Chalk white Chalky Matt Floor paint 2.5L

Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.Cover new ground by adding a classic low sheen chalk finish to your flooring for a contemporary refresh. Coverage: Up to 14m2 / litre. Coverage may vary depending upon method and rate of application and porosity of surface.