Laminating 'Perspex' sheets - as the absorption of the solvent is likely to cause distortions and / or stress crazing sheet can be used if it is suitably annealed prior to bonding. Tensol 12 must not be used with Perspex ME,
Dispense the refrigerated cement directly into the joint using a suitable dispenser. It is best to do this in Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information. Not sure if Tensol 12 is right for your requirements?Dispense the cement directly into the joint, using a small flexible polythene bottle with a suitable nozzle or a hypodermic syringe. This should have a wide-bore needle. applications, 1 to 2 weeks should be adequate. To obtain the maximum strength more rapidly the bond can Anglosol Cement 1200 is suitable for joining items made from ‘Diakon’ acrylic polymers as well as cast acrylic (Perspex). Tensol 12 is designed for the bonding of cast acrylic sheet intended for interior use only. Extruded acrylic Installation.If required please get in touch about our installation services and how we can best support you, all with a smile!
The quantity of cement needed for the following day or shift should be placed in the refrigerator approx. 12 hours before use. Ready filled dispensers should also be kept cool by returning them to the refrigerator after use. Joints will be hardened after about 3 hours at room temperature; but, should not be machined for at least 24 hours. The bonds will reach their maximum strength after approx. 3 weeks at room temperature; however, for most applications 1 - 2 weeks should be adequate.Thoroughly mix the adhesive by stirring, taking care to entrap as little air in the adhesive as possible. The Joints will be set sufficiently to be handled after 3 hours but must not be machined for at least 24 hours Cover the container and allow the mixed adhesive to stand for 5 minutes to allow the larger air bubbles to
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
Joined in 2023 
82 
63
Joined in 2023 
82 
63 
New Comment