Monoprice Select Mini V2 3D Printer - Heated Construction Board - Ready-Mounted - Free Pattern PLA Filament - Pre-Installed MicroSD card - Black

Product Information

The catch is that you’re obliged to use MakerBot’s own PLA filament – if you try to save money by using cheap unbranded material you could void your warranty. Maximum print size is limited too: the base plate measures 115 x 155mm, but the maximum print height is a relatively dinky 65mm. With a poor-quality printer you may hit problems such as the plastic not sticking where it ought to, or the whole model collapsing half-way through printing.

Downloads - Firmware, Software, Drivers, Profiles, etc

Another thing to note is that the Photon doesn’t connect directly to a computer: rather, you have to save your models to a USB flash drive (one’s included in the box), then plug that into the Photon and select the file you want to print.The print base is only 120mm square, and the maximum print height is 12cm, so it won’t do for big, ambitious projects, but on the plus side, the printer itself only has a footprint of 287 x 190mm, so it’ll won’t dominate your desk.

Select Mini Malyan M200 3D Printer [Malyan M200 3D Printer] - MP Select Mini

Key specs – Printing type: Stereolithographic; Print materials: UV resin; Nozzle diameter: N/A; Print resolution: 0. vertical; Quoted printing speed: 20mm/hr; Print volume (WDH): 115 x 155 x 65mm; Printer dimensions (WDH): 220 x 220 x 400mm; Interface: 2. Despite the branding, the i3 MK3S wasn’t the original DIY 3D printer kit, but that’s no bad thing as it benefits from the latest extruder design and all sorts of modern features such as an anti-rust coating, layer-shift detection, robustness against power interruptions and near-silent printing. There are two main plastics used for this, namely polylactide (PLA) and acrylonitrile butadiene styrene (ABS).You don’t necessarily even need to connect it to a computer, as the Select Mini V2 can print directly from an SD card – or you can use its built-in 2. Quoted printing speed: Not stated; Print volume (WDH): 254 x 152 x 170mm; Printer dimensions (WDH): 645 x 406 x 404mm; Interface: 4. printing attracts creative, technical types – so there’s a definite draw to the idea of assembling your own 3D printer.