Rustins Polyurethane Varnish Clear Matt 500ml

Product Information

I go into detail in this guide to deep cleaning wood floors, but the basic steps are to vacuum or wipe loose dust and debris, then mop with a microfiber floor mop and fast-evaporating floor cleaner (like Bona). Also, avoid acidic cleaners and homemade solutions (like vinegar). Those can degrade the polyurethane and ruin the wood over time. Can be applied by brush, spray or roller. Traditional varnishes, in comparison, are usually brush applied only.

On average, you’ll need to refinish floors every ten years. Of course, it also depends on how much wear they experience or if they receive direct sunlight. If you see gouges or scratches, discoloration, or decreased luster, it might be time to refinish your floors. What Experts Say About Matte vs. Satin Polyurethane Now that you know how matte and satin polyurethane compare, it’s time to decide which is best for your project. Semi-Gloss is a step up in sheen from satin. It’s not overly shiny, and hides wear better than high-gloss. It’s a good choice for people who want some shine but not too much. It brings out the beauty of the wood.High-Gloss offers the highest shine. However, it shows all imperfections. It is best suited for specialty floors with low traffic or any wood you want to showcase. Durability and Maintenance Besides the functional benefits, the polyurethane you choose has a significant impact on the look of the wood.

Today, water-based polyurethane varnishes differ from older production of varnishes, in that they produce lower VOCs than resins, oils and solvents previously used. Many manufacturers produce clear polyurethane varnishes, but they are also available in the following tints and shades: He also said, “technically, the higher the sheen, the tougher the product will be — but not by much. On a scale of 1 to 10, with 10 being most durable, satin is a 9.5 matte, and matte is a 9.2. Don’t make your decision based on that because you’re not losing much, and both options are incredibly durable.”

Water or oil-based: Oil-based finishes have a more pungent odor and an amber tint. They can change the look of your wood. If you prefer a clear coat, go with a water-based polyurethane formula. Polyurethane protects wood surfaces, such as floors, furniture, and cabinets, from damage, stains, dirt, and wear. It makes the wood water-repellent but not waterproof. Although labelled as a clear polyurethane varnish, as with any varnish, the finished effect depends on the type of wood it is applied to – with some darkening the wood grain. Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red wine, dilute acid and alkalis.