Bora 542009 Jigsaw Guide

Product Information

All these things need to be considered when selecting the correct blade for the job. Now, get out there and get to cutting! Step 3 Once that’s done, it’s time to lift the jigsaw out of the box! I know it looks scary, but you got this. Go ahead and give it a try. If you’re not sure what to do with the jigsaw, no worries. I’ll break it down for you in the next step.

Narrow blades vs Wide Blades - Wider blades are best for making longer, straighter cuts. The alternative options are narrow-bladed and used for cutting curves. You should have at least three or four teeth touching the workpiece at all times during your cuts. Ah, the classic question: How to make a straight cut with a jigsaw? Well, it’s really not all that hard, but you will need some tools and supplies to get it done. So let’s get started, shall we? Now that you’ve got the materials and the wood all set, it’s time to begin. The first step is to make a guideline with a marker or a pencil. Depending on the size of the cut, you should make the mark so that it is clear and easily visible to the jigsaw blade. Tear out is the term for the splinters which occur on one side of the wood when making a cut. Tear out happens because the last little bit of material is pushed out of the way instead of being cut, causing the wood fibers to break off instead of being sliced through. Switch to a Reverse-Tooth Blade To start, let us help make sure you choose the right handheld jigsaw from our extensive range of products. With options from some of the most renowned power tool brands, it’s easy to find the one that’s right for you. See some of our most popular portable jigsaws below:The first thing you will want to do is to clamp your board down. The movement of the jigsaw blade will cause the board to vibrate, and if it's not clamped down, it could start bouncing around. This makes it much more difficult to get an accurate cut, and could lead to injury. Cutting tile with jigsaws is possible, if you have the right blade. A jigsaw blade for cutting ceramic tiles safely and efficiently will feature an abrasive diamond or carbide-grit edge. They can also be used for the precise insertion of notches, cuts, and openings. Can a Jigsaw Cut PVC Pipe? And don’t forget to put away the jigsaw! Make sure to store it in a dry place, that’s out of the reach of children and any pets. Make sure to also always keep sharp objects out of reach. Last, but definitely not least, always make sure to wear eye protection and hearing protection when using a jigsaw. Safety should always come first! Step eight is the clean-up phase. Depending on your sawing practices, you may need to sand and finish the cut with some sandpaper. But, before you start that, make sure there are no leftover splinters or any other unplanned imperfections.

If the end of your cut is on the edge of your piece, you can simply push through to complete it. However, if the cut ends in the middle of your material like in the photo above, stop and take your finger off the trigger. Medium – a mid-range cutting speed of 1,500 to 2,000 strokes per minute makes the jig suitable for cutting plastics and non-ferrous materials I was quite happy with the results, especially with the crosscuts. The guide is very easy to use, portable, and very convenient for cutting smaller pieces.

Sign up for special offer emails

Most other saws, such as a circular saw, will do a much better job. You can learn more about the difference between a jigsaw vs a circular saw here! You're now ready to start sawing. To use the jigsaw correctly, stand firmly and maintain your focus. Hold the saw in the designated areas on the softgrip with both hands and switch it on. Important: Move the saw carefully against the workpiece when it is operating. Otherwise, there may be a jerking motion which can be painful for your wrist. Once you get the jigsaw going, it’s time to sink your teeth into the wood. I mean, not literally of course – that would really hurt! Just lower the blade into the wood and begin moving the jigsaw in a forward motion, following the cutting line. When you reach the other end, gently pull the trigger to shut off the jigsaw. If the cut needs to be more precise or you don't want to worry about it shifting, you can clamp the square in place and make the cut with both hands. How to Cut Out a Hole with a Jigsaw

Hey hey there edge-slicers, if you’re trying to learn how to make a straight cut with a jigsaw, you’ve come to the right place. I’m sure you’ve heard about the jigsaw and all its amazing functions. But now, I’m gonna give you a step-by-step guide to make sure you get the perfect straight cut every time. Our first step is all about getting the materials you need. Here we go!Like all power tools, your safety is paramount. That’s why our jigsaw cutting guide offers some helpful tips on how to use a jigsaw in a way that keeps everyone safe: Jigsaws have a wide range of uses. With a jigsaw, you can make straight cuts, beveled cuts, and (with practice) plunge cuts. A jigsaw’s blade is fairly exposed. So, keep all your appendages away from the business end. Make sure the jigsaw power tool is completely unplugged (or the battery removed) before you try to adjust a blade. And that’s it! Step 5 complete! Wasn’t so difficult, was it? You already know how to master the mysterious wonders of jigsaw puzzles. Now it’s just a matter of practice and patience. Give this new jigsaw skill a try and you’ll be impressing your family and friends in no time. Step 6