About this deal
Wilder, George. "What are the differences between the two types of drive– Phillips and Posidriv?" (PDF). v8register. Archived (PDF) from the original on 2016-04-09 . Retrieved 2017-09-02. a b Radio Material School, Naval Research Laboratory. (1943). NAVPERS 14004 Mechanical Practice. Washington, D.C.: USGPO. pp. 48, 50, 51.
The applicable standards that govern the Torq-set geometry are National Aerospace Standard NASM 33781 and NASM 14191 for the ribbed version. The ribbed version is also known as ACR Torq-set. [84] Tri-angle [ edit ]Transactions of Technical Conference on Metric Mechanical Fasteners. American National Standards Institute. 1975. p.67. Archived from the original on 2021-04-15 . Retrieved 2020-10-26. Machinery's Handbook (PDF) (27thed.). Industrial Press, Inc. 2004. p.1596. Archived from the original (PDF) on 8 September 2017 . Retrieved 8 September 2017. Combo drive". Klien Tools. 3 November 2014. Archived from the original on March 11, 2015 . Retrieved 1 July 2022.
A combination slotted/hex head cap is often used for self-tapping screws for metal, where the hex head enables greater torque during the initial self-tapping installation, while allowing the convenience of a slotted screwdriver to be used for removal and reinsertion. The Phillips/square screw drive, also known as the Quadrex, Pozisquare screw drive, is a combination of the Phillips and Robertson screw drives. While a standard Phillips or Robertson tool can be used, there is also a dedicated tool for it that increases the surface area between the tool and the fastener so it can handle more torque. [62] Recex [ edit ]
People Also Viewed
Tri-Wing Screwdriver. "Tri-wing screwdriver: Types". Triwingscrewdrivers.com. Archived from the original on 2012-03-23 . Retrieved 2012-03-12.
Apple uses Y-type screws to secure the battery on the 2010 and 2011 MacBook Pro, as well as an extremely small type in the Apple Watch, iPhone 7 and iPhone X. [87] [88] This style of screw is often called a "tri-wing", although that name more properly belongs to a different design (see below).
A U-drive screw has a helical thread with an angle acute enough to be driven by a hammer or pressure from an arbor press, and thus has a domed head with no means of turning it. [92] These are most frequently driven into plastics with a pre-drilled pilot hole. Improvements in or relating to screw threaded fasteners and drivers for use therewith". Google Patents. 1962-05-04. Archived from the original on 2020-01-26 . Retrieved 2017-10-13. Triangular recesses and heads". Screw drive systems. Archived from the original on 2016-10-24 . Retrieved 2017-09-02.