Autoglym Polar Wash, 2.5L - Snow Foam Car Shampoo Safe for Wheels, Paint & Trim

Product Information

The high-foaming nature of the product ensures that you can take your time with every panel, without fear of the product running down onto the floor from the areas you haven’t gotten around to yet.

Yes, it is a high foaming product that allows the user to see where they have agitated the product to minimise chances of ‘missing a bit’. However, although this product has greater cleaning power, its foam does not have the density and cling time of our pre-wash product - Polar Blast. It can perform a touchless clean on very lightly soiled and well maintained vehicles. However, for stubborn dirt and traffic film we advise agitation with a wash mitt or sponge. Don’t forget to hose down your car for a final time when you’ve done all your soaping and rinsing, this will budge those last little bits of dirt and dust that gather in those hidden spots. Wheels Autoglym Polar Wash provides a safe and effective cleaning application via a pressure washer and foam gun. Enabling you to cover your vehicle in a blanket of foam which eats away at dirt, traffic film and grime, Polar Wash is perfect for use following your pre-wash routine. The cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt.Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam. This is Autoglym's heavy duty pre-cleaner, and it doesn’t take much time with it to see why it already has an impressive reputation. In terms of ease of use and outright cleaning power alone, it's hard to choose between this and the pricier Bilt-Hamber's Touch-Less. The Polar Blast's greater dilution ratio offsets its smaller bottle, so you’ll get a good number of washes from it. It doesn’t smell too great, though, with a definite chemical aroma.

Polar Seal is a very protective coating that has been specially formulated for application through a pressure washer with a foam gun. It imparts a hydrophobic layer onto paintwork that causes water to bead on the surface which reduces the time it takes to dry the vehicle. Simply spray onto a clean, wet surface, rinse off and dry to leave behind a durable, high gloss finish. Features & Benefits: Keeping your car exterior clean is a great way to take care of the aesthetic of your car as well as its longevity. Follow our step by step guide. It is important that Polar Seal does not dry on to the surface of the vehicle. Once the car has been coated it should be rinsed immediately. No, it is not necessary. The vehicle should be clean before applying Polar Seal, ideally with Polar Blast and Polar Wash. Polar Seal should be sprayed over all exterior surfaces apart from the windscreen and then rinsed off immediately.Having sprayed on the foam, leave it for the recommended length, usually about five to 10 minutes. Following this, you rinse it all off. Now it’s shampooing time. Does my snow foam gun matter? When giving your car a good wash, we fully recommend the Autoglym Polar Series. These products have been specially designed to use charge interaction to boost the effectiveness of their pH-neutral chemical cleaning agents. Most cars have a negative charge, so when the positively charged Autoglym products are applied, the charge interaction attracts dirt into the formula, making it much easier to wash away. Stage 1: Polar Blast = Snowfoam. pH neutral, apply with pressure washer, leave to dwell for 5 mins or so, rinse off. This removes the loose dirt and helps soften dirt, some of which can then be removed with a high pressure rinse. As with the body of your car, give it time to cool down before getting down to business with the wheels. We recommend that you do not apply wheel cleaners while the wheels are hot.

Although it might seem like the perfect opportunity to wash your car when the sun is shining, make sure it isn’t too hot to touch. If the bodywork is hot, the shampoo can dry out on the car. But, don’t let the industrial smell deter you from using this product. Autoglym Polar Wash is the race car of car shampoos; no bells and whistles, no radio, no heated seats, just pure, consistent performance. About Autoglym We would only recommend its use in place of a shampoo if your paintwork has very light soiling. In these circumstances please ensure you rinse the vehicle first to remove any heavier contamination. data-src="https://cdn.media.amplience.net/i/washford/haluk-car-cleaning-spot1-step3-process-winter21-1382x867" Polar Wash has been designed specifically for use through a pressure washer. We would recommend our other shampoos for hand washing methods.Polar Blast is used as a pre wash snow foam and produces a highly dense foam blanket to your vehicle to help maximise cling time and loosen dirt. Polar Seal is wax safe and we would recommend that if there is wax on the paintwork that Polar Seal is used as a top up. There is no need to remove the wax or other protection before applying Polar Seal. Apply Polar Wash to the vehicle working from the bottom up ensuring all surfaces covered including glass & wheels

Polar Blast is a Pre-Wash product that aids the removal of heavy dirt from the paintwork. It gently loosens and softens contaminants and does not require agitation. Polar Wash is the next stage of the process – the shampoo. It has more cleaning power that can get to work on removing traffic film once Polar Blast has removed the larger particles of contamination.Start from the roof and work down! You don’t want to start with the wheels and then end up washing them again when the water from the top of your car has run down. div>