Kleiber Self Adhesive Waterproof Nylon Repair Patches, Olive Green, ca. 10 cm x 12 cm

Product Information

Use scissors or a knife to cut the tape and round off the corners (this reduces the chance of it from catching and peeling up). If your Montane item is damaged in any way please get in touch we should be able to advise on the repair options available and their specific costs. If cared for properly your Stormline product should last you years. Our skilled team here at Stormline design every piece of clothing with you in mindmeaning your products should only require the smallest amount of maintenance to ensure they last you. and then move the iron along the cut, feeding the tape and baking parchment under the iron, guiding the tape into place along the cut.

If there are any traces left, use a sponge and clean without rubbing so as not to remove the water-repellent treatment. Have no fear, we have created a handy, easy to follow guide that will ensure you a swift and safe repair! What You Will Need For Clothing Repairs Place the garment over the ironing board, as if you were about to iron over the cut, and smooth the fabric down. You might need to support dangling bits of the garment on the ironing board to stop them pulling the cut open. Then use the scissors to round the ends of the tape. This reduces the risk of the patch snagging on things, and being torn off. If the patch starts to come undone in use, you can simply re-apply heat to the tape again, to re-glue it.Stormline provides first-class rain gear that is enduring and resistantto whatever the weather throws at you. You can expect products that are made to last, designed specifically for your industry, for the ultimate protection and durability. Repair & care for waterproofs, PVC gear and garments

Repairs are usually processed within 10 working days of receipt once the item is received, peak periods which extend handling times to 15 working days are in November and December. Cut a second piece of baking parchment as big as the base of the iron. This will stop the iron getting glue on it, and will reduce the risk of damaging the fabric. For customers in ROI, CHANNEL ISLANDS and OVERSEAS the courier cost will depend on the size and weight of your parcel. Please call for details.Impregnation : use a water-repellency liquid reactivator in a basin of water (30°C and 15 minutes of soaking) or in a machine (softener tray, delicate cycle 30°C). Place the second piece of baking parchment on top of the patch, being careful not to disturb the patch. Now turn the garment inside out, and arrange it on the ironing board so that it is ‘relaxed’, with the fabric smooth but not being pulled tight. Again, you might need to support bits of the garment on the ironing board. Carefully align the two edges of the cut, and try to minimise the gap between them. Without disturbing the cut, carefully place a piece of masking tape on the cut to hold the edges of the cut together.

By following the instructions on the label, you will find your waterproofs and PVC gear will last you as long as they are meant to, saving you from a repair service, and helping to keep you warm and comfortable, even in challenging weather conditions – so always read the label. When you’re happy that the patch is in the right place, now is the time to remove the masking tape. You may need to let the whole thing cool down completely to do this to ‘set’ the masking tape glue again. A short spell in the freezer can help. We will always aim to repair items with identical, or similar, materials and restore them to their original performance levels. The adhesive you use should always be designed for the material at hand, which in this case is PVC. We recommend using PVC cement or PVC glue when it comes to doing patch repair to effectively fix patches to the garment.We have a couple of options available for field waterproof repairs, but we know other patches are available. We recommend applying a Rab repair patch of suitable size – a circle is best for this to avoid lifting corners; but any patch is better than none. We will always try our best to repair a Montane product however there are some instances when a product is beyond repair, please bear this in mind. I’ve already put the paper in the hole, and aligned it. All that’s needed is to insert and align the tape. Again, the tailor’s pencil can come in handy; in this case, draw a couple of dots in the centre of the tape, slightly inside the ends of the cut. You can use these to align the patch relative to the cut.

You have two options for clothing and gear repairs – you can do it yourself or you can use a clothing repair service. There are two big players are Scottish Mountain Gear and Lancashire Sports Repairs and both specialise in outdoor clothing but they also do bike gear and have a sliding scale of prices for things like re-proofing, seam re-sealing, hole repairs and even full zip replacements. They are also accredited by W.L. Gore & Associates to work with Gore-Tex fabrics. For the roll: Roll out a piece that will cover the tear with about an inch of space on all sides. Cut the tape from the rest of the roll. Trim the corners with scissors or a knife and round it out into either a circle or an oval. Eliminating corners decreases the chances of the patch catching on something and/or beginning to peel down the road. Montane strives to produce the highest performing, longest-lasting outdoor clothing and equipment possible. Extending the lifetime of the product effectively diminishes the impacts associated with production by sharing them over more years and cutting down on landfill in the process. Place the tape over the tear and measure how much you need. Where possible leave 2.5 cm of excess tape around the rip. In most cases, though, using only Tenacious Tape is suitable. Depending on which type of tape you have — e.g., a roll or pre-cut patches— step three will be different:

First, cut a strip of seam seal tape about 4cm longer than the cut; this gives a 2cm overlap at each end.