Makita DHP486Z 18V Li-ion LXT Brushless Combi Drill - Batteries and Charger Not Included

Product Information

The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications.

Air Compressor Filters Accessories & Consumables Air Tools and Accessories Oils & Lubricants Low Noise Compressors Supplied with a side handle for increade control and depth stop, meaning that you can easily complete repetitive tasks with consistency and without worry. Electric Heater Accessories Gas Cylinder Storage Gas Heater Accessories Propane/Butane Hoses and Regulators Electric Pressure Washers Petrol & Diesel Driven Pressure Washers Hot Pressure Washers Pressure Washer Accessories Detergents, Chemicals and Algicides Pressure Washer Spares Hoses & AccessoriesHigh Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications. The MakitaDHP486Z comes body only - batteries and charger are supplied separately. DHP486Z Features: Product dimensions are stated with a battery / batteries, if they affect the overall dimensions of the product. Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model

The overall length has been decreased by 27mm compared to the previous generation for better handling and control.Screwdriving mode (rotation with clutch) is one of the three drilling modes that can be used to drive screws with an even, uniform finish. Drilling mode (just rotation) provides 130Nm of maximum torque. The hammer drilling mode allows for holes of up to 16mm in diameter to be drilled in masonry.The high-lumen twin LED job light with pre-glow and after-glow provides a clear and reliable light source for the work area. Submersible Pumps - Fountain & Pond Miscellaneous and Transfer Pumps Pump Accessories Pump Controllers & Switches Hose Hose Clips Couplers, Valves & Filters Washdown Pump Kits This cordless drill comes with a brushless motor for increased battery efficiency, variable speed trigger for greater control and forward/reverse rotation functions. Including an electric brake, 2 mechanical gears and a metal gear housing, you can trust this drill to keep on working again and again, whenever you need it. Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 130Nm max. torque. Hammer Drilling mode rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter. A brushless electronic motor runs more efficiently than brushed types. This can help reduce the tool's energy consumption.LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come. Toolden Limited (Company number SC453454). Registered office: 1 Esslemont Estate, Ellon, AB41 8NW. Credit subject to status and affordability. Terms & Conditions apply. Toolden Limited trading as Toolden is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 654671 ). We do not charge you for credit broking services. We will introduce you to Finance available from a number of our partner lenders. Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.

The Makita DHP486Z is a top-end heavy duty combi drill suitable for the professional looking for a machine with extra power and quality build. The DHP486 is powered by any 18v LXT battery and features a compact brushless motor that improves battery runtime by around 30% and requires no maintenance. With a huge maximum fastening torque of 130Nm, the DHP486Z can easily cope with drilling holes in soft and hardwoods up to 76mm diameter and masonry up to 16mm. Three modes include hammer for masonry, screwdriver mode with 21 torque settings for accurate screwdriving and drill-only mode.