Joined in 2023 
82 
63 About this deal
A: The majority of running vehicles are below allowed size, and so the NOCO Boost Plus GB40 will work with most car engine sizes. Make sure to correctly connect the booster clamps to your vehicle's battery. Make sure to connect the positive clamp (+) to the positive terminal of the battery and the negative clamp (-) to the negative terminal.
The absence of a built-in display is compensated for by the charger's construction with high-quality materials, ensuring its reliability and durability over time. The RoHS certification indicates that the charger adheres to European Union regulations and is environmentally sustainable. On a single charge, NOCO Boost Plus GB40 Jump starts most single-battery 12-volts applications instantly up to 20 times. And last but not least, the GB70 can boost vehicles up to 8.0-liter gas-engines and up to 6.0-liter diesel-powered engines, and it can jump-start 40 cars before its own battery is dead. NOCO has beefed up the GB70’s flashlight to 400 lumens.
GENPRO10X2
While the GB40 and GB50 are very similar in specification, NOCO Boost HD GB70 builds on their features with one handy add-on. We’ve touched upon the fact that the GB70 comes with a 12-volt/15A power out port for powering any 12-volt devices like tire inflators, inverters , and more. It offers a 12-volt/3A/36-Watt power input port that allows for rapid charging in 3 hours via your vehicle’s 12-volt port. This greatly increases the GB70’s versatility and usability. Wait, how does that even work? You’ll be most impressed with the recharging capabilities of the GB70. Using the regular 2.1A power input, it will need 7 hours to recharge fully. If you charge it up with its 12-volt/15-amp/36-Watt power-in port, you can boost a dead GB70 to jump-start a vehicle in 15 minutes. To fully charge it will take less than 3 hours with that 12-volt/15A/36-Watt fast-charger. How do they match up on price? Each of these three models offers spark-proof protection, reverse polarity protection, a high-grade LED flashlight, and an IP65 rating for dust- and splash-proof protection. Key differences Start Dead Batteries – Safely jump start a dead battery in seconds with this compact, yet powerful, 1000-amp portable lithium jump starter Not Charging: If your Noco Genius Boost GB40 is not charging, the most likely reason is either the battery or the charger. If you have tried different chargers and batteries, then the problem may be with the device itself.
It does not take a wild guess to know why you are reading the review article on NOCO Boost Plus GB40, because a frustrating mishap can happen to anyone and worse at any time. Press the Power Button to begin jump starting. All LEDs will flash, indicating that all LEDs are properly functioning. If you are properly connected to the battery, the White Boost LED will illuminate. If the battery clamps are connected in reverse, the Red Error LED will illuminate. Reverse the connections to clear this error and then the White Boost LED will illuminate. The White Boost LED is illuminated, when the GB40 is ready to jump start your vehicle. The 25% Charge LED will 'breath' on/off while charging and will be solid Red when the internal battery is 25% charged. For those who require a lot more power than what the GB40 and GB50 can offer, you must fork out quite a bit more dollars for the GB70. Saying that, it still offers excellent value for the amount of power it carries, its added features, and a higher rating for jump-starting batteries. Recap: Which one should you buy?Lovely little gadget, safe and very easy to use, GB40 is still on full power and its been sitting in the car for a month. Highly recommended, good price too. Read full review With a higher power rating, the BOOST X GX75 is also one of NOCO’s most versatile jump starters, capable of restarting large vehicles such as tractors and SUVs. HD Precision Clamps for hard-to-reach battery terminals, in-built reverse polarity, and spark-proof technology.
The GB40 has four (4) Charge LEDs - 25%, 50%, 75% and 100%. These Charge LEDs indicate the internal battery's state-of-charge (SOC). See below: LED In terms of what’s inside the box, you get everything needed for jump starting duties. There’s the GB40 lithium starter, those heavy-duty battery clamps, a 100cm micro USB cable and a microfiber storage bag. The latter is really useful for keeping everything together along with dust and dirt free. A user guide tells you everything you need to know and there’s the warranty leaflet too. Noco Boost Plus Jump Starter: Performance Try starting the vehicle. Most vehicles will immediately start. Some vehicles may require the GB40 to be connected for up to 30 seconds before starting. If the vehicle does not start right away, wait 20-30 seconds and try again. Do not attempt more than five (5) consecutive jump starts within a fifteen (15) minute period. Allow the GB40 to rest for fifteen (15) minutes before attempting to jump start the vehicle again. Oh, and it doesn’t stop there. The GB70 is also the only one that offers an additional charging input: 36W/3A fast adaptive charger. This fast-charging option is a game-changer for GB70 since it provides twice the amperage and battery capacity as GB40. It would, in theory, takes twice as long to charge fully. But with this 36W/3A fast charging, you don’t have to wait half a day to get a GB70 ready for your road trip. The three GB brothersBefore using the Manual Override feature, make sure the HD battery clamps are connected to the correct polarity battery terminals and the HD X Connect is connected to the GB40. To use the Manual Override feature, press and hold the Manual Override Button (a red exclamation point icon inside a red circle) for three (3) seconds. The White Boost LED will flash "On" and "Off" indicating you have successfully entered into Manual Override and it is ready to jump start your vehicle. If connected in reverse polarity, the Red Error LED will illuminate and the unit will not operate. Flexible and well-built cables overheating or melting including the functionality to detect connection errors through the installed system and display along with other problems of the device before use. Turn on the device by pressing the start button. The indicator lights will flash to indicate that the device is functioning properly. One step up, GB50 will jump-start vehicles’ engines up to 7.0 liters for gas, and 4.5 liters for diesel. It will take 30 jump-starts to empty its battery of power. NOCO also upped the flashlight’s strength to 200 lumens.
Great Deal 
New Comment