Johnstone's 390305 Tile Paint Anitque Cream 750 ml

Product Information

Start by stirring your tile paint until it is smooth. Using a paint roller or paint brush , apply the paint evenly across the tiles, covering the grout as well. It may be easier to use a roller before going in with a small brush to work the tile paint into every space. Stir well before use. Apply evenly with a brush or roller and avoid overspreading. Do not apply in temperatures below 10ºC or in damp conditions. Once you’ve painted a full coat, leave it to dry. This usually takes around 24 hours. If you’re painting over patterned tiles or a strong, vibrant colour, you may need to apply a second coat once the first coat is completely dry. 5. Define grouting Once your paint is completely touch-dry, you can add some definition to your tiles by filling in the grout over the tile paint . Using a grout pen, go over your grout joints, defining the gaps between tiles. READ NEXT: Ready for a complete upgrade? Find the best bathroom tiles for you How much should I spend on paint for tiles?

We tested it in the grey version – a medium smoky tone that provided excellent coverage after a couple of coats (as it’s a thin primer, one coat was a bit patchy). We liked its speedy drying time – around an hour before another coat – and there was no strong smell, plus we could wash brushes using soap and water. You can also clean your grouting, using a specialist cleaner and cloth, and fill in any grout that’s damaged or has come away. Read our blog for more guidance on how to grout tiles . 3. Preparing tiles for painting The key to the perfect finish is the preparation so follow these simple steps and you will be rewarded with a gorgeous new look. The paint went on easily and, although we needed two coats to cover the pattern on our tiles, dried to a pleasantly glossy finish. The smell was noticeable, but not strong, and the surface was touch-dry in around four hours. Give the tiles a good scrub using a cloth and your preferred cleaning products. Products with bleach are best for removing limescale, dirt and grease. This will allow the paint to adhere to your tiles as well as possible.It's time to make your cupboards and tiles stand out. Find the perfect tile and cupboard paint at Homebase.A fresh coat ofkitchen unit paintcan work wonders for revitalising and brightening up your kitchen and living space. You can find greatkitchen cupboard paint colours at Homebase, from glossy sheens to wood-effect paints. Revive your kitchen or bathroom with our selection of ceramic and tile paints. Our tile paint for floors and walls is available in a range of colours, is easy to apply, and provides a durable, long-lasting finish. It can be used to completely transform your shower or kitchen, or to make minor changes to existing surfaces. Unwanted Food or Drink Products - Once supply conditions are broken, there are a number of factors outside of our control that can affect the quality of a product. Therefore perishable goods such as food and drink cannot be returned. Colour choice for specialist tile paint can be limited, with some ranges only available in neutral shades, or one or two bolder tones. If you have a specific colour in mind, you can always prime tiles with a high-quality, solvent-based primer and use a high-gloss or semi-gloss paint for the top coats. Just be aware that the surface will probably not be as durable as using a specialist tile paint. If you want to remove old paint from tiles , this can be done using various products such as paint thinner, rubbing alcohol or white vinegar. Simply apply one of these to a cloth or brush and scrub the painted tiles, being careful not to scratch them. 4. Get painting

For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned. All of our recommended specialist tile paints are tested using a small paint brush and a large, ceramic tile with a decorative glaze. Each coat of paint is allowed to dry for the recommended time, with a second coat applied if directed. One-coat products are left as a single coat to assess their claims of effectiveness. Key specs – Colours: 7; Available finish: Gloss; Also suitable for: N/A; Clean tools with: White spirit/brush cleaner Before applying your tile paint, make sure that your tiles are clean, giving yourself a smooth canvas for painting.Other factors we take into consideration during our tests include the range of colours or tinting available, the paint’s value for money – especially when assessing one-coat products and any additional properties such as mould, moisture or heat resistance. Finally, we look at whether the paint can be used on other surfaces, so leftover product can be used up elsewhere.