Furniture Clinic Wood Stain (White Ash) – Fast Drying, Highly Concentrated, and Easy-to-Apply Wood Stain for All Indoor & Outdoor Wood – Water Based & Non-Toxic – 15ml Tester

Product Information

Using a wood conditioner before staining can help achieve an even, blotch-free finish. Quality conditioners partially seal the wood's surface to control stain absorption, ensuring an even colour. Ash wood comes with a natural color of light brown so you should choose the right stain product which matches with the color of ash. Oil-based Gel Stain is a popular choice for staining ash wood. Does Ash Need Wood Conditioner Before Staining? Grab the above supplies from quality manufacturers and get ready to stain ash wood. How to Stain Ash? Applying wood conditioner or grain filler on ash is unnecessary before staining it. The wood is one of the easiest to stain, thanks to its large open pores that allow it to penetrate easily and spread to distribute the pigment stain evenly across the surface. Open Grain: Ash wood has open pores which makes the surface look rough. To get a smooth and fine surface, these pores have to be filled.

Whereas the finish can seal the surface. It protects the wood from moisture. Thus a smooth surface is obtained. Ash wood does not typically require a wood conditioner before staining due to its dense nature and even grain, there are circumstances where using one can help achieve the desired finish.High-quality wood should absorb stains evenly, resulting in a consistent colour. You can test this by applying a small amount of stain to a hidden area of the wood piece. The wood is likely high-quality if the stain spreads evenly and absorbs well. In contrast, low-quality wood may result in blotchy or uneven staining. Woodshop Direct’s Wood Solutions Yes, Ash wood is super easy to stain. You won’t find any other wood that stains well as ash wood does. Ash wood is top on the list of easy-to-stain woods. It readily absorbs stains and allows the pigments to penetrate its large open pores easily throughout the surface. This typically results in beautiful finishes for stained ash wood.

After the wood is completely dried after the first coat, go for a second coat of staining along the wood grain of ash wood. Use progressively finer grits of sandpaper, starting around 120 and working up to 220 for a nice, smooth finish. I had no problem staining ash with blotching most of the time taking it to 400 grit....but that is most of the time. To answer your question, use a 1lb cut of shellac. I would suggest the premixed stuff, it has a 3 year shelf life, and the instructions on the can will tell you how to achieve a 1lb cut.Ash is a fantastic wood with a light, pleasing color and straight grain that makes it an excellent candidate for a variety of stain colors. Ash wood is a very popular wood used for various purposes. Like many other planks of wood, ash wood also needs finishing. The finishing helps to get the best from the wood. Dark stains can add a touch of elegance and formality to your furniture or woodworking project. Experimenting With Stain Colors