Phanteks NV Series NV7 E-ATX-Gehäuse, Tempered Glass, D-RGB - schwarz

Product Information

I am notorious for losing little screws, but it appears that Phanteks thought of this and with the case you get a bunch of spares. The GPU mounting kit is out of the way and study, I dont need it personally but for those with large cards its almost a must!

On the software side, the test setup includes Windows 10 Pro with Furmark and Prime95 both running at the same time to put the maximum load on both the processor and the graphics card. No way to control the onboard RGB lights via software.. limited to what onboard options there are. (Doesn't personally bother me but I did want to point that out)

NV Series

Our test setup focuses on four components small enough to fit into every chassis format. This allows us to compare the impact case size and cooling have on a modern system. Each of the four measured components is connected to a REED Instruments SD-947 Data Logging Thermometer with K-Type sensors that have been placed as closely as possible to the benchmarked areas of the CPU, GPU, M.2 SSD, and motherboard chipset. A fifth sensor is used to monitor the room temperature for an accurate delta T result. While the data provides us an accuracy of one decimal point, it is still dependent on human placement of the sensor as well as small variance in things like automatic disk activity in windows for example. The systems is air-gapped, so that no automatic software updates can trigger an unwanted workload on any of the components. One area where the design feels a bit lazy is on the rear side panel, which needs to be screwed in from the top of the case with a tiny screw. The screw is so small that I can easily see it being lost during the building process, so you’ll want to keep a keen eye on it in case it rolls. Che dire in tanti anni non avevo mai visto un case cosí completo dal punto di vista delle funzionalitá. The Phanteks NV7 PC case is a spectacular chassis for building a powerful gaming PC. Peak performance is easy to maintain, thanks to the extensive support for cooling hardware. The Phanteks NV7 can accommodate an astounding twelve fans, arranged around the motherboard tray. Three 120mm fans can be installed at the top, four 120mm fans on the side, three 120 or 140mm fans in the bottom, and two 120mm fans at the rear. Alternatively, these locations can also accommodate radiators including a 360mm at the top and on the side, a 240mm at the rear, with either a 280mm or 360mm at the bottom. For custom water-cooling solutions, the Phanteks NV7 can easily support dual 360mm radiators at the top and side, alongside a 240mm reservoir combo at the rear. Although if you prefer air cooling, the Phanteks NV7 has 185mm of clearance for a large tower cooler.

I have to say, for such a long and untraditional airflow path, the NV7’s thermal performance was excellent. As mentioned in the acoustic test, we mounted one fan on the side and another in the rear. Our fan setup was not ideal for a case this large, but given that the airflow direction is L-shaped, the thermal performance is surprisingly good and has a ton of potential if you add more fans. Bottom Line Additionally, for RGB enthusiasts there is exceptional support for LED lighting. The Phanteks NV7 comes equipped with two RGB motherboard covers, that are adjustable depending on the size of your board. These covers hide unsightly cables and feature LED strips, for a beautiful framing effect around your motherboard. Furthermore, the Phanteks NV7 supports a wide range of RGB products, such as RGB fans and extra strip lights. Any Phanteks RGB products installed within the Phanteks NV7 can be easily controlled through the D-RGB controller. This new generation of D-RGB controller features the ability to connect RGB products to one of two channels and configure each channel individually, for unique combinations of lighting effects. Phanteks NV7 Full Tower Case Specifications: Dimensions (WxHxD) Sep 7th 2023 Thermaltake Reveals Matcha Green Lineup: Ceres 300 TG ARGB Mid Tower Chassis & ARGENT E700 Real Leather Gaming Chair (8) There are so many configuration options with this case. Want your bottom fans to lay flat instead of an angle? You can change that.

Where are the wires?

Jun 2nd 2023 Alphacool Presents Apex Stealth Metal Fans, Skeleton PC Case, and Water Cooling Solutions (31)

The Phanteks NV7 is an astounding foundation for building a gaming PC, due to its extensive support for a wide range of hardware. Within the motherboard compartment, you can install boards ranging from Mini-ITX to E-ATX. Furthermore, thanks to a GPU clearance of 450mm and 8 PCIe slots, you’ll be able to install even the latest GPUs such as the powerful NVIDIA 4090. What’s more, the Phanteks NV7 can accommodate high wattage power supplies, thanks to its 255mm of clearance within the PSU chamber.the lights on the case are easily controlled and look seamless, the only issue I have with the case is that with the cable management and HDD ports, its tough to get a chain from your PSU to the slots allotted for HDDs. SSDs are fine and NVmE's are obviously fine, so if you don't have a HDD then this point is moot. I am just an old man apparently. lol Se cerchi il case per il tuo nuovo setup, ed hai un budget abbastanza alto, questa é la scelta migliore che tu possa fare. NOTA🎖️: Phanteks ha fatto veramente centro con questo case, un design unico non solo dal punto di vista estetico ma anche del retro invisibile del case, ci sono buchi ovunque per far passare cavi da qualsiasi parte il kit di montaggio é unico, ho avuto una facilitá disarmante ad assemblare questo PC. Nessun "contro" reale se non per il fatto che il case di suo pesa tantissimo per i suoi materiali costruttivi che sono ottimi ma pur sempre pesante, full assemblato il case raggiunge una pesantezza unica. Too complicated to take panels off. You need to remove the top one first, the side glass panel, THEN the front panel... They're connected with screws and you'll need to whip out the good ol screwdriver every time you need to go in to adjust anything.. (coming from an old o11 case this isn't ideal)