GEEKVAPE Aegis Mini 2 / M100 Kit | 100W | 2500mAh | 2ml Z Nano 2 Tank - Grey

Product Information

The quarter twist fill is excellent and my favorite filling design. They fixed the issue I had with the last Z tank I reviewed where you wind up taking the airflow control ring off along with the top cap. This one is much better to remove, so nice small improvement there. There are two large fill holes with no flappers and it’s really easy to fill. Overcurrent protection: Overcurrent protects against a battery current that is too high for your device, which could cause a short circuit and/or damage electrical components. Dual battery vape mods are the go-to mod for many vapers. A typical dual battery mod will take two good 18650 batteries to function but some may take 20700 or 21700 batteries. These mods are larger and heavier than single or internal battery mods because they need to be large enough to accommodate two batteries. This makes dual battery mods less portable than single battery mods but they can still be taken out of the house without being too cumbersome. The screen and control face feels familiar but the buttons are so well shaped and feel tactile.One of the features of the Aegis line is the large screen which they have managed to fit into this smaller kit, and I find it to be one of the easiest to read.The USB-C port is concealed underneath a silicone bung above the fire button.

The Geekvape Aegis Mini 2 comes off really well in terms of its functions available. In addition to the regular power mode and bypass mode, it can also fit in with more complicated scenarios and requirements with the TC (temperature control) mode, VPC (variable power curve) mode and an interesting stealth mode. All these come together to make the M100 a versatile mod kit which can be tailored to the needs of each and every user. And of course, M100 is more tailored for experienced vapers to take good advantage of so many adjustable set-ups. Temperature Control Mode On infrequent occasions Next Day Delivery can be affected by operational issues with our partners and may arrive later than planned. We cannot be held responsible for operational issues with our partner services, but will operate in line with their policies in such an event With a single battery mod, or a built-in battery mod, you usually get 4.2 volts of power at the maximum. Now that is enough for most vapers. If you are using lower ohm coils and sub ohm vaping, this is plenty of voltage. But if you like higher ohm coils, and MTL vaping, you usually need more than just 4.2 volts. There’s no settings menu but I discovered that once you press 3 x Fire then press and hold the Down/Up buttons it will change the colour scheme. Ageis M100 is powered by an integrated 2500mAh battery which supports its 5 - 100W output. Snapshot:

USB Charging port: If a vape mod takes replaceable batteries, it’s always better to charge them in an external battery charger instead of in the mod. It’s only recommended to charge using the charging port on a mod if it uses an internal built-in battery. The USB port can also be used to update the firmware.

Another great feature of the ARMOUR S is its rugged design. It’s built to be durable but still has an attractive appearance. The screen is particularly nice. Although small, it’s clear and in full color, offering all the information that you need about your setup.The GeekVape Z Nano 2 tank is a top filling tank, so you don’t even have to remove it from the mod to add e-liquid. The mesh design of the GeekVape Boost coils heats e-liquid up faster to create a better flavour. To get the best out of your kit, we’d recommend using a 70% VG e-liquid or higher. You’ll also find an adjustable airflow on the top of the tank. With this feature, you can choose a tighter or looser draw. MTL? Nope, even with the 0.6ohm coil and the airflow closed off it is far from a MTL kit, well unless you like a really sloppy MTL high wattage draw that is? Aside from its resistance to wear and tear, there are plenty of safety protections within the AS chipset too. The M100 features 10 second cut off, over-current protection, over-heat protection as well as over-charge and over-discharge protection. The ARMOUR S takes a single 21700, 20700, or 18650 battery to function. Since 21700/20700 batteries usually have higher mAh capacities, a good battery will allow you to vape longer as compared to a single 18650 mod. The L200 Classic is the mod that vapers have been waiting for since the release of the original Aegis Legend. The design of the L200 Classic is similar to the original but with one big difference — it can take two 21700 batteries. You can also use 18650 batteries by using the included adapter. The L200 Classic will fire at up to 200W.

When using a mechanical mod you have to know what you’re doing; knowledge of battery safety, knowing the safe amperage draw limits from your battery, and knowledge of Ohm’s law are all essential. Both the mod and atomizer are mainly constructed of matte materials, good news for those who hate fingerprints on their devices. Meanwhile, Geekvape also manages to make the Aegis Mini 2 look more novel by adding some stylish decorations. Change screen brightness: Hold the fire button and up or down adjustment button to increase or decrease the screen brightness. Under a rubber bung at the top of the mod is where you can find the charging port. It’s nicely hidden and unless you know that the charging port is under there, you would never be the wiser. It’s very well integrated and fits the M100’s clean, streamlined appearance.

Lithium Ion batteries are safely used in millions of devices around the world, every day. As with most high energy devices, there are various risks that users should be aware of when using them. Batteries can pose a fire risk when, over-charged, short-circuited, submerged in water or if their casing is damaged. Although many Lithium Ion batteries are protected, therefore it is vital that you still take the following precautions, as the protection circuit is a potential safety mechanism as opposed to something that should be relied upon. What are battery mAh and amps? But more importantly, did we need a new one? The original lineup still sells really well. It is also still visually appealing, and functionality-wise… it works fantastic. I still use all of my Aegis mods. What could Geekvape possibly change to make it better? Last week we talked about the different versions of the Geekvape Aegis, and which ones were the best. The consensus, was that the entire lineup is great, but some of the mods and kits were better than others. We talked about how cool the then-new IP67 rating was ground breaking at the time.

There are many more features and battery safety protections that vape mods come with, but this should give you an idea of the protections and features that vape mods afford. The Thelema Quest provides similar performance to the much more expensive Thelema DNA 250C mod but at a fraction of the cost. Despite the cheaper price tag, the Thelema Quest still sports the same attractive design and similarly excellent build quality. To put it simply, temperature control mode allows you to preset a value in Celsius or Fahrenheit that your coil temperature will not exceed. The result is a vaping experience that is free of dry hits, as your mod will monitor your coil temperature and adjust or cut off power so that your coil remains at the set temperature. Learn more in our guide to temperature control mode . Voopoo is a company known for their high quality, durable devices and the Drag X Plus Pro Edition is no different. Compact and comfortable to use, the Drag X Plus Pro is powered by a single 21700, 20700, or 18650 battery for power. It’s available in multiple finishes and leather panel options, all of which look and feel premium and high-end. It’s definitely one of the best looking single battery box mods on the market, hands-down. You will then be asked to verify your details by a number of means; Mobile Phone, Credit Card, Debit Card, UK Driving Licence, Citizencard, National DB or Electoral Roll.

The Geekvape L200 is a true powerhouse that is capable of firing at up to 200W in power mode and takes dual 18650 batteries to function. Plus, the Geekvape chip is also capable of Temperature Control mode and TCR for a full set of modes. Please refer to the data protection section of our terms and conditions for information on how we handle data. If you’re not careful, batteries can explode and you can get seriously hurt. With a mechanical or unregulated mod you have to make sure that you are using batteries that are properly rated for the current that you’ll be drawing and ensure that you aren’t building coils of too low resistance. The MDura Pro has one of the nicest, clearest screens on a vape mod. It’s a 1.2” full color TFT screen with a high pixel density. The screen is bright and crystal clear and features a nice UI layout that is easy to read. The fire button is large and comfortable to use, and the battery door is durable and sturdy.