1/2" BSP Thread Pipe Connection Elbow Male x Female Screwed Fittings

Product Information

Please note that it is only recommended to use these products with air or pure water (pure water must not exceed 60°C). In pure water applications, if the temperature of the fluid exceeds 60°C, the heat and moisture can cause damage to the fitting's body and gasket.

All Metric fittings are not supplied with any sealing equipment and require the use of PTFE/Teflon tape when being installed.

Keeping your installation secure and tidy

One of the most commonly used pipe fittings, stainless steel tees are used to adjust the flow rate and change direction. Our steel tees come in sizes ranging from 1/8” to 4”. The right steel fittings for your needs

In Europe Metric (DIN) pipe threads are common on German machines. These generally have a 1.5mm thread pitch, although We are often asked why malleable iron fittings are so popular. Malleable iron fittings are heavier than standard pipe fittings; they have good thermal expansion and vibration damping properties and do not break during assembly. Malleable iron fittings at your door in no timeNPT - National Pipe Thread - is the US standard. Most of the rest of the world uses BSP - British Standard Pipe.

The threaded part(s) of plumbing fittings are usually made to a British Standard Pipe Thread size (BSP).Inch BSP - Central heating oil line connectors, some European toilet cistern fill valves (not common in UK). British Standard Pipe ( BSP) is a set of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes and fittings by mating an external ( male) thread with an internal (female) thread. It has been adopted as standard in plumbing and pipe fitting, except in North America, where NPT and related threads are used. The standard ISO 7 - Pipe threads where pressure-tight joints are made on the threads consists of the following parts:

We’re proud to say that all of our products meet our Quality Assurance Policy as detailed in our AS9100 & ISO 9001 certification, and are used by leaders in the automotive, oil and gas, nuclear and transportation industries. Our clients choose us for our professional, family-oriented customer service, honed over the 30 years we’ve been trading. Choose Custom Fittings for your industrial fittings - and buy from the very best fittings manufacturer there is. After installation, the direction of each push fit hose fitting can be easily swivelled without removal. DZ or DZR symbol stamped on brass components means that the part is dezincification resistant. Dezincification is a form of corrosion that can occur within a plumbing and heating system. How to measure bronze fittings? Our stainless steel hose tail adaptors can be used to connect a hose to a threaded pipe, providing a high-quality, reliable join. Sizes range from 1/4” to 4”. In Japan JIS tapered and parallel threads are common and are interchangable with the respective BSPT and BSPP threads,

How to measure bronze fittings?

Inch BSP - Outlet thread on 3/4 inch outside tap (we have a 7/8 inch BSP brass garden hose connector). Unions are some of our most popular BSP pipe fittings. Our screwed stainless steel cone seat unions range from 1/8” to 4” and are suitable for natural gas, LPG, hot & cold water systems and other applications. NPT has flattened peaks and troughs where BSP is rounded. NPT has a thread angle of 60º where BSP is 55º. Although it is not recommended, these products can be used with other fluids but must not be corrosive or flammable. Please note, using aggressive fluids will reduce the working life of the hose or fitting.