Teltonika RUTX50 Industrial 5G-Router

Product Information

TELTONIKA NETWORKS декларира, че RUTX50 е в съответствие със съществените изисквания и другитеприложими разпоредби на Директива 2014/53/EU The first Teltonika 5G router launched in Sepetember 2022 was the long awaited RUTX50. This 5G router from Teltonika builds upon the success of the Teltonika 4G router range that is widely used in all types of industry for remote access and monitoring using 4G LTE cellular connectivity.

The Teltonika 4G router range includes the best selling RUT951, RUT956 and low cost RUT241 4G routers. Teltonika then launched the RUTX router range which provided a higher specification processor and advanced WiFi to cater for M2M and IoT applications with more demand for speed. Along with the new RUTX 4G routers came higher speed 4G modems, including CAT6 and CAT12 LTE modems for higher 4G speeds. Navigate with confidence using the real-time signal strength indicator, aiding optimal external antenna positioning. With support for 4×4 MIMO antenna connections, the RUTX50 ensures a robust and reliable mobile signal. Swift and Secure WiFi Equipped with 5x 10/100/1000 Mbps Ethernet ports, the RUTX50 stands out as Teltonika’s fastest single-modem router. Seamlessly supporting dual-SIM cards for failover/auto-switch capabilities, it ensures uninterrupted connectivity. Real-Time Signal Strength The NMEA sentence settings section provides the possibility to configure which NMEA sentences will be forwarded or collected and at what frequency. The figure below is an example of the NMEA sentence settings section and the table below provides information on the fields contained in that section:

RUTX50

Käesolevaga kinnitab TELTONIKA NETWORKS seadme RUTX50 vastavust direktiivi 2014/53/EU põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele Stop collecting NMEA data if object is stationary. Ignores data when speed equals to 0 or same as previous coordinates (rounded to 4 decimals). TELTONIKA NETWORKS vakuuttaa täten että RUTX50 tyyppinen laite on direktiivin 2014/53/EU oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits.

The AVL server settings section is used to configure the main parameters of data sending to an AVL server. The figure below is an example of the AVL Server Settings section and the table below provides information on the fields contained in that section: External antennas used with RUTX50 must be installed to provide a distance of at least 20 cm from any people and must not be co-located or operated in conjunction with any other antenna or transmitter. Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations. The RUTX50 supports 5x 10/100/1000 Mbps Ethernet ports and its mobile bandwidth of 3.3 Gbps is the fastest of any single-modem Teltonika router. Dual-SIM cards are supported for failover/auto-switch purposes, adding to the router's versatility, and a real-time signal strength indicator is included to assist with external antenna positioning. It supports 4x4 MIMO antenna connections to allow for the strongest possible mobile signal.Location of the file where NMEA forwarding cache information will be stored. This field becomes visible only when the selected memory type is "flash". The unit must be powered off where blasting is in progress and explosive atmospheres are present or near medical life support equipment.

Eu, TELTONIKA NETWORKS declaro que o RUTX50 cumpre os requisitos essenciais e outras provisões relevantes da Directiva 2014/53/EU Do not leave your device and its accessories within reach of small children or allow them to play with it. They could hurt themselves or others and could accidentally damage the device. Your device contains small parts with sharp edges that may cause an injury choking hazard. Turn retries in case of a failed attempts on or off. When turned on, the device will try to send the same data to the server until the transmission is successful.Leis seo, dearbhaíonn TELTONIKA NETWORKS go gcomhlíonann an RUTX50 seo bunriachtanais agus forálacha ábhartha eile Threoir 2014/53/EU Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code Apart from them, A rich set of Internet protocols, industry-standard interfaces (USB 2.0/3.0/3.1, PCIe 3.0, RGMII, PCM, UART, etc.) and abundant functionalities (USB drivers for Windows 7/8/8.1/10, Linux and Android) extend the applicability of the module to a wide range of IoT and M2M applications such as business router, home gateway, STB, industrial laptop, consumer laptop, industrial PDA, rugged tablet PC and video surveillance. Quectel RG501Q-EU 5G Module Product Features

Hierbij verklaart TELTONIKA NETWORKS dat het toestel I RUTX50 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) Ensure that the voltage and the rated current of the power source match the device’s requirements. Do not connect the device to an inappropriate power source. TELTONIKA NETWORKS déclare que cette RUTX50 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBCThe Main rule section defines how and when GPS data will be collected and sent to a specified AVL server. Refer to the figure and table below for information on the configuration fields of Main Rule. Refer to the figure and table below for information on the configuration fields of the Secondary rules section. Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL