276°
Posted 20 hours ago

DEWALT Diamond Blade for Masonry (DW4712B), Silver, 7-Inch

£8.905£17.81Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

For a higher level of cutting power, choose a blade with a positive rake - a blade that slopes away from its cutting edge on the inner side Ensure the item you are sawing is properly secured to your desk, using clamps and supports. This will prevent the work piece from sliding or slipping as it is being cut Concrete is one of the most versatile materials used in construction and its popularity is only increasing. Concrete can be found in everything from driveways and sidewalks to buildings and bridges. As a result, there are many different types of concrete blades available on the market for different purposes. If you’re like most people, you probably think that a masonry blade can only be used on a circular saw. However, this is not the case! You can actually use a masonry blade on any type of saw, including a hand-held circular saw.

Wear appropriate protection. This includes a safety visor and mask to protect yourself from dust and debris. Ear defenders will protect your ears and dampen the noise produced by the saw It would be best if you chose diamond blades among various options available in the market, like steel blades, abrasive blades, carbide blades. For the record, these saws usually have blades that are 7-1/4” in diameter. That said, what if for whatever reason you need a larger or a small blade? Can you use a smaller or larger blade on your circular saw? It’s a bit more complicated than you might think, so let’s take a closer look. Can You Use a Smaller Blade on Your Circular Saw? However, if you have a diamond blade or a carbide-tipped blade, then you will be able to cut through concrete. Just keep in mind that these blades will wear down much faster than steel blades when cutting through concrete. Can You Put Masonry Blade on Circular Saw? This video guide will help you gain a visual understanding of how to go about the whole process of cutting stone with a circular saw effortlessly.You should always use a segmented diamond blade for cutting stone because it does the job faster and is meant for rough cutting. Put on your personal protective equipment (PPE): a mask, visor and ear defenders are standard for circular saw use

Using chalk is a preferable alternative because you can clean the stone easily. The mark-up needs to be very precise. You can do it using a measurement tape — the clearer the marking, the more accurate the cut. Step #5: Use a Viable Water Source Mark the planned cut line along the target material using a tape measure, ruler or similar device. Make sure this is accurate to avoid waste. On darker materials, masking tape can also be used to mark the line of your cut Be sure to get a blade that is compatible with your particular saw. Different models of saws take different sizes of blades, so it is important to get one that fits yours correctly. Circular Saw Masonry Blade

However, on that note, a smaller blade, due to the way in which gravity and centrifugal force work, is put under less stress than a larger blade. In other words, a smaller blade has the ability to travel at much faster speeds without the risk of breaking. The smaller the blade, the more speed and centrifugal force it can handle. Can You Use a Larger Blade on Your Circular Saw? Finally, when you have finished cutting, turn off the saw and allow the blade to come to a complete stop before removing it from the workpiece

On the other hand, you might also be wondering if putting a larger blade on a circular saw is fine, or if it is even doable at all. Well, this is unfortunately not the same as with a smaller blade, especially as far as space is concerned. Concrete saws: also known as grinders, these heavy-duty models have large and powerful blades with teeth made from industrial diamonds or similar materials. Despite the name, they are also an effective cutting solution for cutting through masonry and similar materials

Using a circular saw is not a very daunting task. Of course, you need to be extra careful and follow all the instructions mentioned above. The first time can be intimidating for some, but if you do it just once, you will understand how it works, and the task will be a piece of cake for you. Ensure that any offcuts or waste material will fall cleanly away from the blade. This is especially important if you are left-handed because you will be holding the tool differently to your right-handed colleagues Never use a dull blade. Make sure your blade is sharp and in good condition before switching on your saw If you are cutting wood, whether ripping or crosscutting, a circular saw is always something that you will have a use for. Circular saws are very versatile tools, and this is mostly thanks to that fast-spinning blade.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment