276°
Posted 20 hours ago

Razer Panthera Evo: Fully Mod-Capable - Sanwa Joystick and Buttons - Internal Storage Compartment - Tournament Arcade Stick for PS4 and PS%

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Often, you will have several options to personalize your control panel, such as button layout, removal of control panel or screws in some models, button label etching, and text etching. This print came out way better than I expected! It's heavyweight, excellent quality, and the colors are true to what I expected! Thanks FA! BinaryDigit Razer’s software platform, with over 50 million users, includes Razer Synapse (an Internet of Things platform), Razer Chroma (a proprietary RGB lighting technology system), and Razer Cortex (a game optimizer and launcher).

RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO - Reddit RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO - Reddit

Once you're done, you should have a total of 9 wires connected between the pcb and the breakout, 8 on the bottom pins and 1 on one of the top pins. Panthera PCB Wiring --- Alternate View Hello! Does anyone know where you can buy a replacement plexiglass cover for the Panthera EVO? I tried looking around on the official razer store and also googled but found no store that sells it.Edit 2: Added photo of internal wiring per request, although it's pretty shabby... https://imgur.com/JD6UvjB There are six (6) Phillips head panel screws located underneath the Panthera EVO. These hold the tinted acrylic cover in place. Each one is accessed using a mini precision screwdriver. Anything larger will risk stripping the screw. Turn carefully - the screw will take a bit of effort to loosen on first go, but will give way. Once the screws are removed, find a safe place to temporarily store them as they are quite small and easy to lose. You're basically done! To make your life a billion times easier, use two of the screws you set aside from the beginning and screw down the razer pcb with them. Use the remaining two screws to secure the Breakout to the other holes in the case. Just make sure not to screw down the breakout too much, as there's no protective casing at the bottom, and you don't want to accidentally damage it. Zip-tie or shove the wires in whatever way you please, and you're good to go! One significant change from the original Panthera is that the Evo doesn’t use Sanwa buttons. Instead, the Evo features Razer Action Buttons, which use the same Razer Mechanical Switches that the company puts into its keyboards. With a 30-million tap life cycle, they should last a long time. Do this by using a very fine-point object like an Exacto knife to lift up the Small Tab and pull the wire out of it, with the male end looking like This.

Razer Panthera Evo: Fully Mod-Capable - Sanwa Joystick and

Essentially, each of the 8 pins on the bottom row goes to a specific button, while the top 8 pins all go to ground. No, the Razer Wolverine V2 Chroma does not support wireless connectivity. It can only be connected to devices using a wired USB connection.

Razer Panthera Evo Arcade Stick Review

You now need to get power to the Kaimana from the USB port. You'll notice that the USB wires are soldered/glued onto the board, and that there are five pins next to next to them. Take your remaining two jumper wires and plug them into the 1st and 4th pins going from top to bottom, like This. --- ALTERNATE VIEW

Artwork Print and Cut for Razer Panthera EVO - Focus Attack Artwork Print and Cut for Razer Panthera EVO - Focus Attack

Ok, so I searched EVERYWHERE on the internet for a tutorial on how to add kaimana LED's to a razer panthera, and there was only one post by u/carpedro from about a year ago. That post laid some very important groundwork on how to approach modding the panthera, and also gave some information such as button diagrams and other important discoveries. However, some of his explanations were a tad confusing, and some things in the tutorial could be simplified to make the whole process a lot easier. This will not fit the original Razer Panthera (2016-2017 model), nor Razer Atrox for Xbox One or Xbox 360. Blank plexi, custom etch plexiand artworkfor the original Panthera are available if you are looking for that model. Installation We cannot replicate this panel, so when servicing the unit upside down, we recommend that you place it on a soft cloth or towel as it tends to scuff easily on hard surfaces. Pushbutton manufacturers such as Sanwa, Seimitsu, Crown and GamerFinger have each produced specific models with a clear or translucent plastic cap and flat plunger. These are often used to display a graphical insert, allowing you to enhance the button's appearance. That said, each button manufacturer has designed the artwork cap with a different diameter than their competitors. For example, GamerFinger's artwork cap has a diameter that is slightly larger than Seimitsu or Sanwa. An insert cut for a Sanwa artwork cap will fit loosely when inserted into the GamerFinger artwork cap. This is an undesirable result that can produce a white or colored ring around the insert.The main function buttons have been moved to the top right and are lined up accordingly, giving it a much cleaner look. There’s an added mute and volume button for the mic which is nice. Similarly measuring the button rim can lead to confusion, as it is intentionally larger than the button hole it is placed in. You don't want to use these measurements. Instead, review the button housing diameter, or the hole the button will be placed in. You can do this with a caliper - a digital caliper is often quite helpful for this and other arcade-related projects. Control Panel Configuration You now need to use most of those wires to connect the button inputs from the Razer pcb to the screwdowns on the Breakout. u/carpedro provided a very useful diagram of what each of the pins on the Razer pcb goes to: Diagram

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment