Autoglym Polar Blaster Snow Foam Lance, Car Wash Foam Gun For Pressure Washer Application

We would not recommend it is used with other Autoglym products has these have not been developed to be used through a pressure washer. Keeping your car exterior clean is a great way to take care of the aesthetic of your car as well as its longevity. Follow our step by step guide. Rival brands offer 5 litre offerings rather than the 2.5 litres here for similar price points which perform very effectively. As mentioned above, most users will apply their snow foam through a specific lance attachment for their pressure washer. These aren’t always universal, so make sure you choose one that’s compatible with yours. They usually have a bottle into which you’ll pour the snow foam concentrate. And depending on the size of your car, this may need to be refilled several times. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination.Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on. If your vehicle only has very light soiling and you are using in place of shampoo. Please rinse vehicle first before applying Polar Blast. You can either allow to dwell and rinse without agitation or agitate with a sponge or wash mitt prior to rinsing. The Autoglym Polar Kit contains 3 products used via a pressure washer to maintain & protect your vehicle. Screw the Foam Gun Head (B) onto the Polar reservoir bottle (D) and attach the Polar Blaster to your pressure washer lance.

Depending on your needs, snow foams generally come in two forms, for a less aggressive treatment, UF Ultimate Snow Foam is ideal if you have an existing wax or sealant on the vehicle which you are keen to protect, not remove. Alternatively, if you require a little more bite, using a snow foam such as Auto Finesse Avalanche is recommended. It is still completely safe to use on all surfaces of course, but is specially designed to strip heavily soiled vehicles. This really is dependent on several factors including the level of foam you would like to achieve, the settings of your pressure washer and the hardness of water in your area.Only a small amount of Polar Seal is required. Pour no more than 40ml (four capfuls) into your foam bottle and then add at least 200ml of water. This should be all the finished solution required to cover your vehicle. There is no benefit in using any more than 40ml as over application can compromise the finish. Use the maximum foam setting when using the Polar products. However, it is possible to rinse the Polar Blaster through between uses by turning the foaming adjustment off. We recommend starting with a snow foam like Polar Blast to gently loosen dirt, and follow with Polar Wash to remove any dirt or contamination on your paintwork.