Osmo Decking Oil 2.5L - Black - 020

Product Information

Product is very good, delivery was not so great took 5 days to arrive which was 3 days longer than advertised so the long weekend I planned was of no use as the product did not arrive as scheduled"

Also oiled finishes although dry and ready to use after 24 – 48 hours continue to cure and get more durable for days and weeks following application. Covering will prevent the natural curing process from occurring and this is one of the reasons we do not recommend putting rugs over and oiled floor for the first month. If this is the first time you have oiled/used a particular product it is best to patch test a small area to see how much oil needs to be applied for it to soak into the wood.Protects wood against Scottish winters and is effective for more than two years. Gives wood a nice appearance. Costs more than is justified."

Thank you for getting in touch with your enquiry. It depends what was previously on the wood and how long ago it was treated. You can do an oil test, leaving a small drop of oil on the surface of the wood for around an hour and see how it reacts. If it moves or soaks in then you are likely to be able to apply an oil if it remains unmoved then the is something on the wood that is preventing penetration. By using carefully harvested natural oils and hard waxes, Osmo is proud to call its products vegan.

Also Recommended

Bangkirai: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.

Would that make a difference to the appearance? Or does oiling effectively hide the grey on its own? Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel. Rosewood: 4-6 weeks exposure. However, Natural Oil Woodstain 727 Rosewood is optically suitable and requires a weathering period of approx. 12 weeks before use of Natural Oil Woodstain. Always do a test area before starting any project to assess product suitability and final finish. Always follow the manufacturer's instructions on the tin. Species with a high content of natural wood extractives will need to weather off, usually for 4 weeks minimum. Alternatively clean with Osmo Brush Cleaner and Thinner to degrease.As the wood is Balau there may be a naturally high oil content already and a test area first to ensure the wood will accept further oil is strongly recommended. You could wipe down the surface of the wood with Methylated spirits first as this will encourage the wood to accept more oil. Then two thin coats are all that is required. We are set up to do a big deep clean with oxygen bleach and want to apply something that is as indestructible, low maintenance and long lasting as possible. Basically hoping to get it done and forget about it for as many years as possible! The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. The Natural colour is perfect for those who want to preserve the authentic appearance of their wood, while the satin finish provides a smooth, even sheen that looks sophisticated without being overly glossy. Although the drying time is a bit longer at 6 hours, the application is still simple and convenient with either a brush or roller. Thank you for getting in touch with your question. Pressure washers are great for stripping away old treatments and ground in dirt. On wood however you do need to take care not to hold the nozzle too close to the surface of the wood, as this can splinter the wood. I can only really suggest further sanding to get that smoother result how far you can take this depends on the condition of the wood.

As you have a dog I would recommend considering an oiled finish, this will be far easier to maintain over time, oils soak into the wood surface and so is less likely to be effected by claw marks, and even if it is, you can simply patch repair and the oil will blend well. Oils are also easy to maintain as they wear, simply ensure the surface is clean and dry and then you are able to apply a top up coat when needed, usually around 1 or 2 years down the line, depending on use. After the weathering period, it is generally recommended to clean the surface from the extractive content. Osmo Wood Reviver Power-Gel can be used to refresh the colour of the wood. If necessary and before application, de-grease the dried surface with Osmo Brush Cleaner and Thinner (degreaser), always trial apply! I am sorry for the delay in response, it is a super busy time here at Wood Finishes Direct. A stain or paint is a surface sealer and is likely to, over time, peel and flake, if the treatment appears to be lifting it is likely that this is the finish you have and this can be removed with a pressure washer or stripper product such as the Paint Panther Paint and Varnish Remover Test areas are always recommended to ensure you like the look to be achieved and if you use a colour then this will also increase the UV protection to the wood and slow down the silvering process. The timber quality is excellent, the price was competitive, the communication spot on and the delivery just right. Well done and thanks again”

Types of Decking – Softwood and Hardwood

A little goes a long way and it is likely that you will only need the 125ml tin of each colour to complete your project, although this is dependent on the size of the sculpture and the condition of the wood, for example if it is particularly dry the uptake of oil will be more. Test areas are vital to ensure you like the colour that will be achieved.