Joined in 2023 
82 
63 About this deal
Always clean off dirt, mud and mould before fence painting. If your fence is mouldy, then consider applying a fungicidal wash to kill mould and algae before going anywhere near a paint brush. Painting over mould and moss will only result in the paint not adhering well to the wood. This One Coat Fence Life – Medium Oak by Ronseal has an elegant, rich colour. It’s the best fence paint if you’re after a traditional look and easy application. It can be used on both sheds and fences. Some of the best fence paints are versatile enough to be used on several different surfaces. Look for paint that can be used on wrot timber as well as rough-sawn timber if you want to paint furniture as well as fences.
When fence painting with a brush, you should work with the direction of the wood grain. If painting with a spray gun, you should work in sections, moving the paint sprayer left to right over the section whilst working either top to bottom or bottom to top. Dries much faster, to a hard finish, than water-based paint (although is slower to be ‘touch dry’). For reference: a 5 – 6 L tin of paint will cover approximately 30 m² (about 10 fence panels) . Although, of course, this depends on how many coats are needed. A 9 L tin can cover around 54 m² ( up to 17 fence panels) .One 5 L tin of One Coat Fence Life covers a large area. According to Ronseal, each litre of paint can cover 6 m² per coat. This means that a 5 L container holds enough product to cover 30 m². Both water-based paint and solvent-based paint can be used on exterior surfaces – as long as the specific paint products states that it’s suitable for this purpose. The paint tin should state whether it is water based or oil/solvent based. Finally, the coverage: one litre of this paint can cover up to 6m², so the 5L pot should contain enough paint to cover 30m²– approximately six shed panels (depending on how many coats you have to do). It’s the best fence paint for keeping mess to a minimum, and can be applied with either a brush or a spray gun. Although it achieves good coverage most of the time with just one coat, there are some instances where two coats might be required. For example:
Painting a lighter colour over a darker one will likely always result in some of the base colour showing through. Better results will be achieved with several coats of paint, but there’s always a risk that it won’t turn out quite as vibrant as expected. A 1 L tin provides enough fence paint to cover approximately 12 m² (approximately five fence panels), so it’s one of the more expensive options featured on this list, but the coverage is good and it’s easy to apply, often only requiring one coat. Personal preference of course plays a huge part in what colour paint you should choose. But there are a couple of things to bear in mind on top of that: Choosing a Colour Based on Function
You can choose from natural wood shades, with brown and red hues, or go for a pop of colour to really brighten up the garden.
Cuprinol will likely need to be heavily diluted if used with a paint sprayer, so there is a possibility that another coat will be required in that case. Two coats might also be needed if painting over a darker colour, or applying the paint on fresh wood. Create a strong ‘theme’: choose a colour that matches your flowers or shed. For example, if you have a lot of purple flowers in the garden, painting the fence and/or shed in the same colour can create a cohesive and strong theme for the space.
What Is The UK’s Best Fence Paint?
Another benefit of this fence paint is that it can be applied on either damp or dry wood, although it still needs to be applied on a dry day. This means that even if there have been a few days of rain, you can still paint your fence or shed once the sky clears. It soaks in to the wood as opposed to sitting on the surface, which can make for a longer-lasting finish.
Great Deal 
New Comment