276°
Posted 20 hours ago

Airflow iCON 30 Extractor Fan 230V 100mm Outlet, White, 27 W

£49.195£98.39Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Do not use household cleaners containing abrasives. Cleaning of the internal parts such as the impeller should be carried out by using a soft brush. Never clean any parts of the fan assembly by immersing in water or using a dishwasher. Fan and ducting should be inspected and cleaned on a regular basis to maintain fan performance. The external housing of the fan can be wiped with a damp cloth. When the iCONsmart is first powered on, you will hear the initial reset for 10-15 seconds. This is normal and will also occur if the fan is in its reset mode. App Control and Setup

Model above is for basic on/off switching. Choose an optional control module to upgrade fan for Pullcord, Pull cord with adjustable timer, Humidity, pull cord with timer overrun, motion sensor with timer overrun, Motion sensor/humidity/timer . Don’t forget to add the control module you want. Only low voltage module fits low voltage fans. It/s so iCON easy Applications: For fans mounted in zones 1 & 2 as defined in BS 7671:2018, additional protection must be provided by a Residual Current Device (RCD) not exceeding 30mA as well as having an Arc Fault Detection Device (AFDD). To replace the IPX cover, line up the L (Left) and R (Right) indicators on the main body of the fan (Fig. 6) with the L and R indicator on the IPX cover (Fig. 7). Lightly press the IPX cover onto the main body. This really is an excellent extractor that uses just 2W of electricity when running continuously and no more than 5W at full pelt. It’s also one of the most attractive models around – the fascia can be used bare or with the included white magnetic cover – and one of the very quietest.This standard 30 model (72591601) is suitable for installation into zone 3 of the bathroom and offers basic on/off switching. Choose an optional control module to expand the functionality and automation:Pullcord, Timer, Humidity or Motion Sensing options.

The precise duration of the overrun is normally configured during installation, with most fans offering a range between 30 seconds and 30 minutes. You might as well tend towards the latter end of the scale as the cost is very low: on average, a fan like this uses around 8W. Make provision for the electric supply cable and wall plugs / appropriate fittings using the main body as a template. Level using guides below the L and R symbols. (see Fig. 6) In a survey carried out by ventilation specialist Vent-Axia, 40% of respondents said that they or their children had been woken in the night by a noisy bathroom fan. Even the cheapest fans are usually very quiet out of the box, but as the motor bearings start to wear – typically after about two years with low-end models – the blades can start to oscillate against the main housing, producing an annoying rattle in the process. A higher-quality fan should last longer, but if you value quietness then at some point you’ll probably need to repair or replace your fan. How do you install a bathroom extractor fan? The PureAir Sense comes with two spigots (or sleeves): one for standard 100mm installation and another for larger 125mm portals. The larger spigot is the one to fit if you want to benefit from its excellent 39l per second flow rate. That said, its standard 32l per second flow rate is still better than most and easily good enough for the majority of bathroom installations. If you don’t already have a fan, you’ll need to get in a qualified builder to make the hole and install the wiring. Be aware that there are regulations governing where your fan can be located: if you want to put a fan in Zone 1 (the area within a shower or 2.25m above a bath) or Zone 2 (60cm from Zone 1), it must be a low-voltage SELV fan with a transformer, or an AC-powered model that’s IPX5-certified. Most of our recommendations below are intended for use outside of Zone 2, but the layout of your bathroom may dictate your options.The Airlfow Icon 30 fan is very powerful. With an extract rate of 32 litres a second, it meets the building regulations for bathrooms, kitchens and utility rooms.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment