Knightsbridge 2GPHW Mobile Phone Shelf, White

Product Information

In OxygenOS, the OnePlus Shelf is a feature that functions as a personal space for organising your daily life. It gives users access to various widgets and shortcuts to the most used apps, such as Calender, Memos and Weather, and it all can be accessed with a single swipe from the Home screen. The first DIY on my list is a phone stand made from paper rolls. Get two paper rolls, cut through the length of both, cut open each side of one of the paper rolls to give two open pieces. Take one of the pieces and glue it to the opening of the other paper roll. Use cardboard to cover the holes from the paper roll, then, wrap the remaining cardboard around the whole phone stand. 2. DIY Origami Phone Stand Its main aim is to make finding apps easier, negating the need to swipe through your phone for specific applications since they are all located in one place, as soon as you open the phone. Phone holders aren’t always for while you’re actively using your device. Like bowls for keys and hangers for coats, it’s a good idea to give your devices a spot in your home so you’ll always know where they are. Make the most of your home's space with our array of shelving, floating shelves and corner shelves. Freestanding Shelving Units

You can even hang it off an outlet so you can hang your phone while it’s charging. No more following the cable to remember where you left the darn thing. Complete with built-in surge protection, the has been specifically designed to filter out high voltage surges and spikes from the mains supply, thereby preventing potential damage caused to computers and sensitiveelectronic equipment. This is made from a hanger (it can be used or new). Cut and remove the hanger's curve, flame polish the middle of the cloth line, and fold into two with the small hanging curves coming forward. Flame polish the curve to enlarge them. It is easy and cheap to make. 10. How To Make A Phone Stand The features an intelligent amperage split, that divides up the power between the connected devices depending on the device's power needs - so your device will always charge at the optimum rate. This is made from metal and 6mm MDF. This mobile stand is foldable which means it can be carried everywhere. Fix three straps of metal together for the stand then glue the MDF to the metal of its size, make two pieces of this and one serves as the board on which the phone rests on and the other serves as the base. 22. Homemade Tripod Stand DIYJust note that the design linked above is specifically for bigger phones, so you’ll want to change the size before printing if you have a smaller device. Phone Shelf This was made solely from cardboard. Cut three pieces of cardboard each of different sizes. make a hole on the longest pieces, glue the second long piece to the longest to form an angle. Glue the third piece to the end of the second and pads it to the hole on the longest piece. The mobile phone stand is ready. 14. How To Make A Paper Mobile Stand In making this DIY phone stand you will need wood, a laser cutter, a keychain, and a computer. Draw the blueprint on the computer with every dimension properly in place. Then, put the won't inside the laser cutter and connect the CorelDRAW software to the laser cutter. The laser cutter will cut the wood into shape in the CorelDraw file and you have your phone stand. Attach your keychain to it. Cut through the length of two pipes of different sizes, straighten the pipe or make it flat by ironing it over a sheet of paper. Repeat this step for both sides until you have two flat pieces. Cut the longer piece into a rectangular form and the small piece into a square with accurate measurement. Assemble both on each other and you have your mobile phone stand. 4. DIY Customized Phone Stand This origami phone stand is made solely from a sheet of paper. Start by holding the sheet of paper into two halves, undo the fold and you have the center line in place. Then, fold the two bottom parts to the middle, undo the fold, repeat this step for the two upper parts as well. The folding continues. In making this DIY, all you need to do is to fold each angle and line very well and you will arrive at your origami phone stand. 3. How To Make A Mobile Stand

Freestanding shelving units are a fantastic option for anyone looking to find stylish storage solutions that don't require built in furniture to be installed. At B&M, we have a wide range of freestanding shelving units for you to choose from, so you can be sure you'll find a unit that ties in with your current interior design choices. Take a closer look at what we have to offer, and browse the full collection online or shop in stores. Floating ShelvesThe stand is a ready-made materials ball you need to do is to add a tube to it where the phone will rest. It is very simple and cheap to make.