Fire Door Gap Gauge Checker Tool, Small and Light, Pocket Fit

Product Information

The clearance under the bottom of a door and raised non-combustible sills will be an optimum of 3/8 ″. Step 1– Find out what kind of door and frame you are inspecting to determine the required NFPA 80 requirements. Door Requirements – For the Top & Verticle Edge The clearance at the underside of the bottom of a door and non-combustible surface shall not exceed 3/4 ″.

At All Things Inspector, we are experts at developing materials that help construction crews keep up with fire door compliance. Watch the video to find out for your self that the Fire Door Gap Gauge is a simple to use, highly efficient “must have” tool that every inspector, fire marshal, commercial property/maintenance manager and fire department needs in their toolbox.

How can you make your fire doors more effective? Safety Accessories for Fire Exit Doors - Fast Delivery A fire door should have a gap around its base so that it can swing freely. But if the gap is too large, smoke and fire may be able to escape from an adjoining room into other parts of a building. Fire door alarmsFire door alarms are fitted to fire doors to prevent unauthorised entry and exit. These alarms are triggered by the unsanctioned use of a door. Fire door alarms can be used on interior and exterior doors and are used in various industries for differing purposes. Integrated door control systems establish foot traffic flow in one direction.

The gaps between a Fire Door and its frame need to be 2 to 4mm in width to ensure that both the door can close smoothly and that the fire cannot spread through the gap of the fire door. Our Fire Door Gap Gauge is a handy tool designed for easy use thanks to the clearly marked dark blue "Recommended Door Gap" area. Fire doors are a critical part of fire protection in buildings. A fire door is a type of door designed to slow the spread of fire, heat and smoke from one compartment of a building to another by isolating the compartments. Fire doors can be found in almost every commercial building and business premises. For Steel Doors Swinging in sets the clearance between the top and the vertical edges of the door, the frame, and the meeting edges shall be 1/8 ″– 1/16 ″. Step 3– Verify that your door gap gauge that the gaps fall within the clearances outlined by NFPA 80 and change as required. Comply with legal requirements while catering for the practicality and need for open fire doors during normal circumstances.Our team of qualified fire door surveyors will measure, specify and quote for fire doors in the locations where you require them. This service is ideal for new premises where fire doors need to be fitted, and those that need to replace older fire doors that are damaged or no longer compliant. Fire door accessories: recommendationsFire door accessories assist with legal compliance and overall health and safety measures. We recommend that you keep the following in mind: We have actually produced the following list for property managers and building owners for keeping their doors within NFPA 80 compliance. This is the ideal solution for holding a fire door open and is essential for areas where access is a necessity. We can program these devices to have timed releases which will ensure the fire door is then lightweight, easy to handle and swings freely.

Fire pillows are designed to provide a temporary or permanent barrier against fire, used in spaces which frequently change their layout and materials. They consist of a waterproof glass cloth bag filled with organic fillers infused with intumescent additives that expand once exposed to heat. Fire door holdersAlthough fire doors should ideally be shut at all times, this arrangement is not always practical. A fire door holder – or fire door hold open device – can be fitted to a fire door to keep it open during normal situations. These devices can be directly connected to the fire alarm or be acoustically activated by the sound of the fire alarm. Once the fire alarm is triggered, the fire door holder releases the door for closing. Dual-marked feeler gauge for measuring narrow gaps or clearances. Individual denominations in metric and imperial. Steel blades measure from 0.04-0.88mm and 0.0015"-0.035" and the brass blade measures 0.254mm and 0.01". Step 4– If you still require some assistance we have a couple of how to use a door gap gauge videos that you can watch.Protecting people and property through 3rd party accredited Passive Fire Protection services, nationwide.

Grab your gauge, find the size you are looking to confirm and insert the gap gauge under the bottom of the door and take an accurate measurement. A fire door gap can be shortened through the use of surface-mounted smoke seals and rebated drop-down smoke seals. We can close the gap on existing fire doors easily using these products. This is suitable for an existing fire door gap up to 14mm on the underside of the door. Keep in mind and note all clearance measurements on the pull side of the door so you can document them for your annual NFPA 80 inspection. Since they can be retrofitted to existing doors, they are suitable for use with older fire door assemblies that were built without seals.

In addition, the closing speed can be adjusted and holding angles can be set to between 65 ° and 105°. The brown or white rebated intumescent fire door gap seal contains expandable intumescent material which, when subjected to heat, forms a tight seal around the fire exit.