Mitre Shears/Mitre Angle Trim/PVC Decking Cutter

Product Information

The outline of the cutter is rough-cut and the fence is finished by taping the MDF to it and, with the cutter set to its initial height (see below), slowly pulling the fence forward past the cutter to complete the cut-out. If you are going to be moving your Mitre Saw around, using it on-site, and taking it with you to various job locations then a Mitre Saw Stand will be incredibly helpful.

For laying engineered wood and luxury vinyl flooring we’d choose the R210SMS-300+ and a 210mm Fine Wood blade; that’s the perfect Mitre Saw for cutting any flooring up to 300mm in width.A Double Bevel Saw can rotate both left and right, about the vertical plane, to make bevel cuts on both sides without having to flip the workpiece. We also manufacture a range of material specific blades for cutting wood, mild steel, 304 stainless steel and aluminium. Rotate the cutter so that the tongue is in its furthest forward position and set the fence so that the centreline on the test piece is lined up with the outside edge of the tongue. The Multi-material blade of the RAGE5-S will also easily cut through your metal stud, hanging brackets, floor and ceiling tracks. At their core, mitre saws are designed to cut at an angle, allowing for a variety of cutting options.

This is especially useful when fitting skirting boards, coving and dado rails, as these can be sawn to the exact angles required by the installation. Whether you’re working with metal, silver, gold, or other materials, our mitre cutter jig will help you achieve clean, accurate cuts every time. They can be used on any flat surface, bench mounted, used on a Sawhorse Table or fitted to our Universal Mitre Saw Stand. Our S355CPS is the industry standard metal cutting Chop Saw and used by welders, machinists and fabricators all over the world. These gasket shears are great for cutting rubber but also for cutting wood or plastic trims for windows and doors, these hard-working shears are made to last and will stay sharp and true even with daily use.The lock mitre cutter gives a tremendously strong corner joint with a neat mitred appearance, and can also be used for flat joints in made-up panels, doors etc.

These saws are ideal for making complex, decorative cuts on intricate work, such as crown moulding where cut angle precision must be exact in both directions. Cleaning the teeth of your blade, especially if cutting exterior grades of wood will help to keep your blade running cleanly by removing sap and resin build up.PVA Glue Reinforcement: Do not forget to reinforce the structural pieces with PVA glue during assembly to increase its resistance. The clear disc has indentations that help the blade cleave over materials, and the measurement diagrams below allow you to cut pieces to the same size.