U-Pol Raptor Truck Bed Liner Paint 4 Litre Kit BLACK

Product Information

Even though it needs a respray, it still a far less expensive option to paint and protect your vehicle from the elements. And when done right, it looks amazing. It’s also a pretty awesome achievement to do it yourself. When applying with a roller, use a fine roller for a smooth finish or a textured roller for a textured finish. When spraying, a higher PSI gives a smoother finish. As with any type of paint, proper preparation and testing is vital to achieve the desired result. Next step is mentally preparing ourselves for the fact that the rest of the vehicle needs to be resprayed. This will involve: Our paint job was full of scratches and was so porous that we were unable to clean off spilt car polish from the bull bar. Adam had used a foam polishing disc with a plastic polish to tidy up our head lights. A little polish spilled onto the raptor coated bull bar and it was like the polish had absorbed into the paintwork. It couldn’t be sufficiently cleaned and ended up staining the bull bar permanently. Using Buzzweld Quora colour system we can provide the correct pigmentation to provide you either a pre-tinted or add-on colour to tint Upol Raptor Bedliner to your specification.

Drastically reduced product requirement when using Buzzweld Quora tints to remove opacity prevalent when using many other tint systems. RAPTORis remarkably easy to use. To achieve different finishes, it can be applied using a brush, roller, Schutz gun or even a conventional spray gun. Simply add the hardener to the base material in the bottle and you are ready: Fill - Shake - Shoot.Having the time – it will take a full day of preparation and another day for the respray. Plus, being without the vehicle for a minimum of five days – including drying time. Finding the space – we don’t have our own garage and air compressor, so we need to borrow the space again. Up to 10% solvent-based automotive paint can be added to Raptor Tintable products. Flat colours are recommended rather than metallics. Some acrylic basecoats can have a high colour strength, so less than 10% tint will be needed. Raptor must not be moxed with water based, polyester or enamel paints. Where possible, ask your paint supplier to leave out the binders for best pigment quality. Yes, Raptor can be baked at 60c for 30 minutes. This will speed up the initial drying but will not reduce curing time; the finish should not be subjected to heavy use for 7 days and should be kept clean and dry for 72 hours.

RAPTOR is a highly durable protective coating that ensures protection against mechanical damage, fuels, hydraulic oils, rust, corrosion, salt water, damp, extreme temperatures and off-road muddy good fun.

Write Your Own Review

Raptor protects the roughest industrial surfaces as well as the smaller surfaces we rely on every day. Unlike other protective coatings, Raptor can easily be repaired. Buzzweld is proud to bring you a fully approved and tested platform to tint your Upol Raptor Bedliner products,and more.

The air pressure was set at 55psi. The professional spray gun has an adjustable nozzle which enables complete control over the volume of paint flow. This was probably set too fine. If you need assistance with your delivery please call 01454315588. Our staff will be more than happy to help.

After spending 50+ hours repairing all the damaged panel work on the car, it was time to begin the next stage of preparation. It took an agonising long time, we were really excited to get to the fun part – the spray job. We mixed the tintable raptor coat, automotive tint and hardener together and cleaned the spray gun between each bottle. This was all executed perfectly.

Raptor Protective Coatings are a tough and tintable Polyurethane coating, that provides surfaces with a protective barrier. This protection can withstand the toughest situations. It is resistant to mechanical damage. It will withstand contamination by petrol, fuel oils, animal urine, saltwater. In addition, it can protect against chemicals such as solvents, xylene, phosphoric acid, battery acid, hydrochloric acid. etc. The product can be applied using a roller, brush or a spray gun. When spraying, a 6 HP compressor with a 150 PSI line pressure is recommended. A variety of different finish textures can be achieved by increasing or decreasing the PSI. We always recommend using genuine Raptor applicator guns or rollers for best results. RAPTORwill restore the most damaged and uneven surfaces to a good as new pristine finish. Once applied, it will dry rapidly to give a scratch, stain and U.V.-resistant, durable surface. Other benefits include good adhesion, waterproofing, and flexibility. It will also deaden sound and vibrations.Unfortunately, Adam can’t exactly recall how many turns of the nozzle, but it might not have been enough. RAPTOR RAPTORis one of U-POL’s unique super tough protective coating products. You can use it over many surfaces, and RAPTOR can be applied in such a way as to create both smooth and textured finishes. We wanted a really fine sandpaper look and it turns out, it was probably too fine. Raptor paint is meant to flog out of the gun, but in our case, it didn’t spray out of the gun the way that it is designed to. Why did the raptor paint fail? Different products have different effects on colours, so a basecoat, will not match a raptor tint perfectly. expect some deviation between different products once tinted.