276°
Posted 20 hours ago

Snowboard Bindings Tool & Ratchet Screwdriver

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

You can use this basic tune kit for snowboards, but also for ski waxing. No one will judge you, I promise! Do not use Loctite or any other form of glue or adhesive. If your bolts are continually coming loose then it is likely they are worn and should be replaced If you already have all your other tools, you really need a good iron like the Waxing Iron Swix has made here. This is a real deal waxing iron, coming up from a company like Swix which has been dealing with wax since 1946. It’s a 110V iron made for dialing in your waxing needs. Though really what you must accompany a good tuning kit with is a good tuning table.

If you’re just starting out snowboarding or don’t want to put much money into what may be a costly sport, for now, a simple basic tune kit like the XCMAN Snowboard Ski Edge Bevel Tuning Kit would be more acceptable. Extras

Sure, it’s great to have options. But like 90% of the time a good old-fashioned Phillips head is all you need, and Union has you covered with their #3 screwdriver. This screwdriver works for all the screws Union uses, which let’s be honest given Union’s domination that’ll work for seemingly almost everybody these days. One of the most crucial components of any waxing kit is the iron. Choose one with decent temperature control so you can change it according to the type of wax you’re using and how cold or hot your snowboard is for the best experience. This was the first multitool I ever bought and still gets the job done. With a #2 and #3 Phillips, #3 Posidrive, a flathead and a small hex (that all fit into the hollow handle) it can handle basically all your binding needs – certainly tighten your baseplate when you get those early season wiggles. And it’s got a wrench. But where I prefer it over the Stance driver and other Dakine snowboard tools is the ability to grip its perpendicular handle and really crank down. One of the best snowboard multi-tools on the market. The multi-tool also gives you 2mm, 3mm, and 4mm Hex bits for a more specialized use that can come in handy in certain situations. The #3 Pozidrive bit is also specialized, but it will surely pay off when you need it. This high-quality edge tool gives you the ability to grind your side edges to a precise degree while you’re out on the slopes. The included file guide gives you the means to make 87,88,89 and 90-degree edges with ease.

Do use the correct size screwdriver to ensure the bolts are nice and tight without stripping the heads of the bolts

These adjustments will also make a difference to your riding style. If you are unsure of the setting for rotation, lean or canting then it is usually best to leave them at the factory setting and only adjust them when you become more confident. It is often a good idea to experiment with different combinations to get a feel for the best setup for you. Insert the remaining 3 bolts and washers (if included) on each binding and tighten them a few turns at a time, moving in a diagonal pattern to ensure an even and level mount. This also reduces the chances of threading a bolt or insert The Dakine Torque Driver is another fantastic tool that gives you the ability to adjust your bindings or anything else that needs a little bit of tweaking when you ride. Thanks to a torque-style design that fits easily into your hand, it’s very convenient to use.

When mounting your snowboard bindings please follow the manufacturers instructions as every brand has a slightly different procedure to follow when it comes to adjusting and setting up your bindings. The guide below will help you to understand some of the basic principles and get you on your way to the slopes in no time. Setting up your bindings and mounting them onto your snowboard is so simple. If you can use a screwdriver then you can do it! Snowboard bindings are nothing like ski bindings which need to be professionally mounted. Brexit - Shipments from the UK to EU countries will now attract VAT charges and potentially duties & customs fees payable upon entering the EU. These fees are payable by the recipient. Its only really when you swap boards on the same day of riding that you really start to get a feel for how these differences affect the ride. DEMON UNITED’s Ski and Snowboard Tuning Kit is an all-in-one solution for a messy snowboard. The kit includes an iron, plastic scraper, base cleaning, base ironing wax, edge tuning wax, and file—everything you need to keep your board looking good until next season. It’s time to talk more about what you should consider before purchasing a ski and snowboard kit, now that you are aware of what my top 8 waxing kits look like.

Final Thoughts on How to Sharpen Snowboard Edges

Next is your ability. If you are a beginner it will recommend a shorter length. If you are intermediate or above it will ask what kind of riding you are into. If you are mainly a freestyle rider it will recommend a shorter board that is easier to throw around. If you are into free riding and power it will recommend a longer board that floats up more in the snow.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment