276°
Posted 20 hours ago

SHEL Sensor H&T WIFI TF wh

£20.27£40.54Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Depending on how a device’s button type is configured, the integration will create binary sensors corresponding to those inputs. binary sensors are not created when the button type is momentary or momentary_on_release, for these types you need to use events for your automations. Binary input sensors (generation 2) With the introduction of the Shelly 4Pro PM also came the introduction of a new generation of devices. The integration uses Device Name to name its entities if the device has only one relay or no relays at all. Monitor remotely: Monitor you home, no matter where you are via the Shelly Cloud app and your phone. It can be integrated to work with all other Shelly devices. Using the homeassistant.update_entity service for an entity belonging to a battery-powered device is not possible because most of the time these devices are sleeping (are offline).

If the Input Mode of the switch connected to the device is set to Button, the integration creates an event entity for this switch. You can use this entity in your automations. Events Irrigation only when needed - Having a beautiful garden is not an easy task and automating your irrigation system can save you time and optimize your costs. Together with a soil moisture sensor, Shelly Plus Add-on can trigger Shelly Plus 1 to turn on the irrigation only when necessary, always skipping the rainy days. switches/energy/shelly_3em.yaml - platform: mqtt name: "3EM - Relay" expire_after: 604800 qos: 1 command_topic: "shellies/shellyem3-/relay/0/command" state_topic: "shellies/shellyem3-/relay/0" # Remove the line below if the value_template doesn't function properly value_template: {{ 'on' if value == 'on' else 'off' }} # Test for capturing 'overpower' state - platform: mqtt name: "3EM - Phase A - Reset Totals" expire_after: 604800 qos: 1 optimistic: true payload_on: "reset_totals" payload_off: "" command_topic: "shellies/shellyem3-/emeter/0/command" - platform: mqtt name: "3EM - Reset Device Data" expire_after: 604800 qos: 1 optimistic: true payload_on: "reset_data" payload_off: "" command_topic: "shellies/shellyem3-/command" Shelly 4Pro ¶This does mean that some configs that are more related to the device (e.g. device temp) are grouped with that light. Needless to say, once that’s all done, the Shelly H&T appears just like any sensor in HomeKit. As this device has two sensors, it initially shows up as just one tile, as standard in iOS 13, but you can, of course, separate them to show individual tiles for each sensor in the Home app. Since a Shelly relay (e.g. Shelly 1 or 2.5) only supports on/off toggling, so it doesn’t really matter whether it’s configured as a light or a switch.

Shelly Plus Add-on is a galvanically isolated sensor interface for all Shelly Plus relays. Use it to measure temperature and humidity using its 1-Wire terminals, or connect various analog and digital sensors for complex automation and higher efficiency. Highly compatible An awning that follows the weather - Outdoor motorized awnings offer pleasant shade for your guests on sunny days. However, a strong, unexcepted wind can damage them beyond repair. By combining it with a wind sensor connected to the Shelly Plus Add-on, Shelly Plus 2PM can automatically close the outside awning to protect them from the wind. Additionally, Shelly Plus Add-on with a rain sensor can trigger Shelly Plus 2PM to open the awning just in time to protect your guests.Water heating - Using Shelly Plus Add-on and two DS18B20 sensors, you can easily measure the precise temperature inside your aquarium, as well as the room temperature. Based on this data, you can maintain a comfortable and healthy environment for your pets. Additionally, you can connect a liquid level sensor to the Add-on, and always be sure that the water level is at its optimal level. We’re all using Home Assistant to automate our lives, why not use it to automate device integration? Shelly Gen 1 and Shelly Gen 2 ¶ However, it’s just a matter of setting the correct platform and/or adding the config in the right file for your Shelly to be configured as switch, cover, … Shelly relays (1, 1PM, 1L, 2.5) ¶ sensors/energy/shelly_3em.yaml - platform: mqtt name: "3EM - Phase A - Energy" value_template: "{{ value|float / 60000 }}" # Wm to kWh unit_of_measurement: 'kWh' expire_after: 86400 device_class: energy state_class: total_increasing qos: 1 state_topic: "shellies/shellyem3-/emeter/0/energy" - platform: mqtt name: "3EM - Phase A - Returned Energy" value_template: "{{ value|float / 60000 }}" unit_of_measurement: 'kWh' expire_after: 86400 device_class: energy state_class: total_increasing qos: 1 state_topic: "shellies/shellyem3-/emeter/0/returned_energy" - platform: mqtt name: "3EM - Phase A - Total Energy" value_template: "{{ value|float / 60000 }}" unit_of_measurement: 'kWh' expire_after: 86400 device_class: energy state_class: total_increasing qos: 1 state_topic: "shellies/shellyem3-/emeter/0/total_energy" - platform: mqtt name: "3EM - Phase A - Total Returned Energy" value_template: "{{ value|float / 60000 }}" unit_of_measurement: 'kWh' expire_after: 86400 device_class: energy state_class: total_increasing qos: 1 state_topic: "shellies/shellyem3-/emeter/0/total_returned" - platform: mqtt name: "3EM - Phase A - Power" unit_of_measurement: 'W' expire_after: 86400 device_class: power qos: 1 state_topic: "shellies/shellyem3-/emeter/0/power" - platform: mqtt name: "3EM - Phase A - Voltage" unit_of_measurement: 'V' expire_after: 86400 device_class: voltage qos: 1 state_topic: "shellies/shellyem3-/emeter/0/voltage" - platform: mqtt name: "3EM - Phase A - Current" unit_of_measurement: 'A' expire_after: 86400 device_class: current qos: 1 state_topic: "shellies/shellyem3-/emeter/0/current" - platform: mqtt name: "3EM - Phase A - Power Factor" # If the PF is returned as a value between 0.0 and 1.0 # instead of a % value between 0 and 100 # uncomment the line below #value_template: "{{ value|float * 100 }}" unit_of_measurement: '%' expire_after: 86400 device_class: power_factor qos: 1 state_topic: "shellies/shellyem3-/emeter/0/pf" Binary Sensors ¶ For generation 2 hardware it’s possible to select if a device’s input is connected to a button or a switch. Binary sensors are created only if the input mode is set to switch. When the input is of type button you need to use events for your automations. Event entities (generation 1)

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment