DrayTek Vigor V2927-K Dual Ethernet Gigabit WAN Wired Router

Product Information

The Vigor 2927Lac provides up to 6 Gigabit LAN ports for wired links to Computers, Servers and Network Attached Storage. The TCP port has been changed. By default, HTTP uses port 80, but you can deliberatelychange that. If you have done so, you need to append the port number to the URL, for example http://192.168.1.1:88. For most Fibre networks in the UK & Ireland, no VLAN tag is required for Internet connecitivity on the Vigor 2927 router. For example with the Openreach Fibre network. If VLAN tags are used by the ISP, they are usually handled automatically by the ISP supplied ONT.

The Mesh Root provides Internet and network access. This controls the other VigorAPs in the Mesh Network and provides Internet connectivity. Connect the ONT into the router's WAN2 port. Make sure that WAN2 is enabled and not currently being used as LAN port P6. The Vigor 2927Lac is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput and up to 50 concurrently active VPN tunnels. Vigor2927 Series has two Gigabit Ethernet WAN ports that can be used for any types of connection, 3G/4G/LTE USB modem can also be attached to the USB ports of the router, and offer wireless Internet connectivity in case the fixed lines are not available. All of the WAN interfaces can be configured to be operated in either Load Balancing mode, which will be active all the time, or in Failover mode, which will be active only when detecting connection loss or heavy load on the primary connection.That will open a new window to configure the VPN settings. See the table below for a description of what each setting does and the recommended settings for connecting an SSL VPN tunnel:

The Vigor 2927 Router (along with most other DrayTek routers, access points and switches) can be centrally managed by DrayTek's VigorACS central management platform. This scalable solution provides visibility, control and reporting of your entire DrayTek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. VigorACS also provides features like automated/bulk firmware updates, VPN management and alarms for connectivity or other issues. Robust & Comprehensive IPv4 / IPv6 Firewall To connect a DrayTek router to a CityFibre network's ONT, set the Service VLAN to enable and set a tag value of "911". The Vigor 2927 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput and up to 50 concurrently active VPN tunnels. In any problem state, it's usually best to use a wired (RJ45/Ethernet) connection rather than wireless. If you cannot access the web interface of your Vigor router, here are some possible causes:If the details are correct, the account will be able to log in and it will be possible to access the router's Command Line Interface. It supports all common industry standard VPN protocols, for it to connect to VPN services, link remote offices and handle connections from all types of VPN clients. Supporting IPsec IKEv1 & IKEv2 protocols with EAP and XAuth authentication, DrayTek's SSL VPN and L2TP for both LAN to LAN and Dial-In teleworker VPNs. In addition, teleworkers can connect to the router with OpenVPN. DrayTek Vigor routers from the Vigor 2860 / 2925 and later support the Web Console feature, which allows command line interface via the router's web interface, using the same encryption that the web interface is accessed with (HTTPS is recommended). The output of some log commands, typically ones that are more verbose, such as "log -wt" is not supported through this interface. DrayTek VigorSwitch switches can be provisioned and managed through the router with DrayTek’s Central Switch Management system, which allows you to:

The 2927 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast and efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless and allowing the router to effectively serve more wireless clients. Wi-Fi 6 - AX3000 Performance DrayTek Vigor routers and access points are primarily configured and monitored through the Web User Interface ( WUI) but can also be monitored or configured through the router's Command Line Interface ( CLI). The router will accept commands that follow valid syntax (type " ?" in the CLI for examples of these) and allows the router to output information that may be required for diagnostics. Nearby Mesh Nodes can connect to an Ethernet Mesh Node instead of another Wireless Node to reduce the 'hops' between Nodes. A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible. DrayTek's VPN Matcher service helps DrayTek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two DrayTek VPN routers that are behind NAT and could not normally establish a VPN tunnel. DrayTek SSL VPN for Dial-In Teleworkers & LAN to LANLondon, September 16 2020 –Business class networking solutions manufacturer DrayTek is delighted to announce the introduction of the Vigor 2927 series. This new line of DrayTek routers offers dual Gigabit WAN throughput, enhanced broadband failover, wireless and firewall VPN features - perfect for small business, home offices and remote workers. With Multiple LAN subnets and VLANs, the Vigor 2927Lac can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service and Route Policy applied. With Multiple LAN subnets and VLANs, the Vigor 2927 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service and Route Policy applied. Make sure that the Ethernet cable being used is of good quality and has all 8 wires. The [Dashboard] should show the Ethernet WAN port in green to indicate it's connected at Gigabit speed. If it's orange, speeds will be limited to 100Mbps. To begin setting up the router that will be establishing the Internet connection, connect a network cable from the ONT's Ethernet ports into the DrayTek router's Ethernet WAN port: DrayTek Router