OMPHOBBY M1 RC Helicopter for Adults, Dual Brushless Motors Mini Helicopters Direct-Drive 3D Remote Control Aircraft-BNF (OMP Protocol Purple)

Product Information

The OMP M1 EVO RC helicopter is the latest OMP Hobby helicopter design, and successor to the popular M1. Receiver Options: OMPHobby or SFHSS built-in (See Below). Both models support external SBUS receivers or Spectrum Satellites

The helicopter supports one one SBUS port. You can connect a SBUS compatible receiver to this port. It will override the internal OMP receiver. e.g. OSHM2055 S-FHSS micro receiver

BNF Package Includes:

OMPHobby M2 EVO and M1 EVO OMP comes with built-in receiver that supports OMP Protocol. In OMP Protocol, the throttle curve is fixed in the helicopter and cannot be adjusted at the Transmitter Radio. OMP protocl supports telemetry for Helicopter battery voltage. Normal, Idle-up1 and Idle-up2 flight modes are assigned by a switch on the Radio transmitter. For OMP Protocol, there are no throttle curves on the Radio Transmitter as throttle curve is fixed inside the Helicopter. For other protocols, the below curves are used. Curve Included accessories: Charge lead, nut wrench, screwdriver, 1mm hex wrench, spare screws & servo arms.

You can customize the model configuration as per your linking. Please refer to explanation of different settings. Switch Assignment

The OMPHobby M1 RC Helicopter BnF is a great micro (150 size) 3D Flybarless RC helicopter. Best for indoor flying during bad weather days. It can be flown outside as well. The Archer Plus RS mini receiver is perfect for M1 and M2 helicopters due to its compact size. It even comes with the correct adapter cable. The OMPHobby M1 is compatible with the Radiomaster 4in1 series of radios (Both Types - OMPHobby Protocol & SFHSS) Scroll to Source and press the scroll wheel button. Then scroll till you find your desired switch. Press the scroll wheel button to confirm. Throttle curves Flight time: the maximum flight time is 8 minutes at ~ 50% throttle and 4 minutes at ~ 90% throttle.

The OMP M1 EVO comes as a BNF “bind and fly” helicopter kit, which requires a separate compatible radio transmitter of your choice. The Radiomaster ZORRO RC Transmitter (4 in 1) comes programmed for use with the M1 RC Helicopter. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S, Zorro etc. SFHSS transmitter. For other brands you can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here). This is a “bind and fly” helicopter kit which requires a separate compatible radio transmitter of your choice. The Radiomaster ZORRO RC Transmitter (4 in 1) comes programmed for use with the M1 RC Helicopter. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S, Zorro etc. SFHSS transmitter. For other brands you can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here).This guide will show you how to setup your Radiomaster TX16S or any EdgeTX / OpenTX Multi-protocol radio for your OMPHobby M1 or M2 Helicopter. If you are using OpenTX we recommend that you upgrade your TX16S to EdgeTX. EdgeTX model configuration files Configuration File