TP-Link EAP660 HD | Omada WiFi 6 AX3600 Wireless 2.5G Access Point for High-Density Deployment | OFDMA, Mesh, Seamless Roaming & MU-MIMO | SDN Integrated | Cloud Access & Omada App | PoE+ Powered

Product Information

Using the Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 06-08-2023 17563

What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 16277It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.

The performance of the EAP660HD is evaluated with the help of an iperf2 server and client. The first test is done through the Uplink port at 2.5Gbps to get an upper limit of the bandwidth. Next, the wireless bandwidth is determined at various distances over a Wi-Fi 6 connection. The test is done in a multi level house with drywalls. Furthermore, if you do decide to use a PoE switch, then the TP-Link EAP660HD doesn’t require that much power (only up to 21.5 W), so you don’t need anything that fancy, but a multi-Gigabit Ethernet switch is still a preferred option. And that’s because of the 2.5GbE port (it’s a shame not to try and take advantage of it, but we’ll see if the WiFi will actually allow us to go above 1Gbps). Internal Hardware

Tốc Độ Cực Nhanh Với 8 Luồng Không Gian

The EAP660HD can put out a maximum of 1.53Gbps through its Uplink port. For the following test points, iperf2 was run using the HE.Net application for Android. At a one meter distance, the speed drops to 782Mbps and further decreases to 431Mbps and 183Mbps at seven meters for two different floors. The speed eventually reaches 42Mbps outside of the house at ten meters. The results fall in line with other similar access points. The competition

Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a VPN Connection (Controller 5.0 and Above) 05-05-2023 17169 Fixed the bug that when a port conflict is detected, the prompt message is not centered and the display is incomplete.

Maximale draadloze signaalfrequentie op basis van specificaties van de IEEE 802.11-standaard. De werkelijke draadloze gegevensdoorvoer en het draadloos bereik kunnen niet gegarandeerd worden en variëren op basis van 1) omgevingsfactoren, met inbegrip van bouwmaterialen, fysieke objecten en obstakels, 2) netwerkomstandigheden, met inbegrip van lokale interferentie, omvang en dichtheid van het verkeer, locatie van het product, complexiteit van het netwerk en overhead, en 3) clientbeperkingen, met inbegrip van nominaal vermogen, locatie, verbinding, kwaliteit en toestand van de client.

The tear-down process for the TP-Link EAP660 HD is fairly simple, but you do need to be aware that opening up the case will most likely void the warranty. If that’s fine with you, then you need to remove the four screws from the bottom side and it seems that TP-Link also decided to include one more screw underneath the label that’s very difficult to remove without leaving severe marks. I guess it’s their own way of adding a warranty seal, like Asus does. In any case, after removing the five screws, you need a prying tool and carefully detach the top cover. This way, you’ll be able to see the PCB with a large metallic heatsink and a curious antenna design at the top.

Chuyển Vùng Liền Mạch

If you are using an old Omada controller and plan to upgrade this firmware for EAP, you must upgrade the Omada Controller as well: Upgrade Guide To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. Omada mesh may require upgrading the firmware.Omada Mesh, Seamless Roaming, and Captive Portal require the use of Omada SDN controllers. Please go to Omada MeshProduct List to find all the models supported by Omada mesh technology, and refer to the User Guides of Omada SDN controllers for configuration methods. meer capaciteit verwijst naar de toename van de gemiddelde doorvoer in omgevingen met een hoge dichtheid in vergelijking tot een standaard 4×4 11ac access point. Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL)