Shelly 20210 EM Schalt-Messaktor Wi-Fi

Product Information

For this reason, the opening state of the valve maps to the on (opened) state of the entity and the closing state of the valve maps to the off (closed) state of the entity. If the Input Mode of the switch connected to the device is set to Button, the integration creates an event entity for this switch. The new sensors have been added to the Total Metered Devices sensor, which is used to calculate any Unmetered Devices power consumption such as the fridge/freezer, microwave, kettle etc.

Shelly EM - fuse-box Home Assistant Energy Monitoring with Shelly EM - fuse-box

The LAN cable connector must not be metallic in the parts touched by the user to plug in or unplug the cable. View the quality of your electricity network regarding active power, reactive power, voltage, and power factor. For me, this took several retries before the new device was registered on our IoT device Wi-Fi network. If Shelly devices are in a different subnet than the Home Assistant server, you should ensure communication on UDP port 5683 between these subnets.Always be notified and monitor your power consumption with Shelly EM, so your power counter never cuts-out your electricity. I read I needed to add a availability line into the sensors as it resets even rebooting similar to this. In case device name and channel names are not set, the entity name will be generated by the Device Type, Device ID and Channel Number. For battery-powered devices, the update platform entities only inform about the availability of firmware updates but are not able to trigger the update process.

Shelly EM Device Smart Control

This will reflect on the device name in the application if the “Sync name” application setting is enabled. If you have Valve add-on connected to Shelly Gas, the integration will create two entities for the valve. I look forward to using this module along with others I have already installed from Oz Smart Things! Power supply AC 110-230V ±10%, 50/60Hz Contactor Control Yes - max 2A Warranty 24 month Roller shutter mode No Device temperature protection Yes Overload protection No Power measurement Yes Working without neutral line No Channels 2 Channels Operational temperature -40 to + 40 °C Device power consumption lower then 1 W Intelligent On/Off Yes Local and remote control Yes Sunrise/Sunset Yes Weekly Schedule Yes UL Listed option No Wireless/WiFi Protocol 802.Allterco Robotics is an innovative company founded in Bulgaria with the goal of making life easier for modern people. If Home Assistant is running as a virtual machine or service on an operating system other than Home Assistant OS, you should open UDP port 5683 on the device’s firewall and/or ensure that communication from this port is redirected to the Home Assistant service. Shelly 3EM exports all data in CSV format in 10-minute intervals, making data analysis and cutting back costs easy. Consider adding another WiFi access point, which will improve the connection quality with the device. Shelly EM, however, will immediately report the increase in energy consumption and save you additional expenses on repairs or equipment replacement.

Shelly EM + 50A Clamp | Wi-Fi-Operated Smart Energy Meter and Shelly EM + 50A Clamp | Wi-Fi-Operated Smart Energy Meter and

This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. To add the new sensors to the new Energy Dashboard, you need to create template sensors with the name starting with "energy".There are some differences in how devices should be configured and in the naming of entities and devices between generations. The main development lines are the Smart localization devices MyKi, Home Automation products Shelly and a line of Health Care products - MyKi Care. More than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices. Shelly Pro EM-50 can be accessed, set up, and monitored remotely by the User, as well as the Device can access and communicate with an automation system, as long as they are in the same network infrastructure.

Shelly EM Power Logging with Home Assistant - Brian Dorey Blog Shelly EM Power Logging with Home Assistant - Brian Dorey Blog

Control a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc. The key part is to articulate the state_topic correctly, and remember that the first circuit’s ID is 0 (and the second circuit’s ID is 1).If you think your Shelly devices are working correctly and don’t want to change your network/configuration, you can ignore the repair issue. Besides precise power metering, Shelly EM allows contactor control of heavy-load appliances such as powerful water heaters, hot tubs, heat pumps, and large kitchen appliances. Your device is on when there is a blue ring around the power button ⏻, and is off when the ring is gray.