Joined in 2023 
82 
63 About this deal
ios: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPod touch 6, iPad Pro, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, and iPad mini 4 Wi-Fi + Cellular. This app is optimized for iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s and iPhone 6s Plus. Using a battery charging hub: When used with the DJI 30W USB-C charger, the battery charging hub can fully charge one battery in approximately 56 minutes and one Intelligent Flight Battery Plus in approximately 78 minutes. Each drone battery type has a different temperature you should be charging the battery at. You can find this temperature in the user manual for the drone. Usually, people follow the general rule of charging the drone between 22 to 28 degrees celsius.
After flying - give the battery at least 10 minutes to cool down before charging. The heat can build up in LiPO batteries so ensure you let the temperature drop before starting to charge, which can increase temperatures.Because these batteries are still Lithium Polymer batteries they are still vulnerable and still have all the same problems that normal LiPo powered drones have. Try to carefully remove the top cover of the drone battery. Using the old credit card that you cut into strips should help you unclip the cover. You can fix your Phantom 3 LiPo battery that is not charging by using a multi-functional charger. Start by charging the battery at 0.1A using a NiMH charger. Once it’s recovered to around 2-3 volts per cell, you can switch to the LiPo setting and balance the charge of the battery until it’s fully recovered. 3. Overcurrent Protection This is also quite common when the batteries are still new and haven’t been charged up yet and makes people think they received a faulty battery although it is just in hibernation mode.
Charge and discharge the battery completely once every 20 charge/discharge cycles. Discharge the battery until there is less than 8% power or until it can no longer be turned on, then recharge it to the maximum capacity. This power cycling procedure will optimize the battery life. DJI drones use Intelligent Flight Batteries which are basically just Lithium Polymer batteries but with the only difference being that this type of battery prioritizes safety and has a lot more technology to help with that. The battery will eventually come out of hibernation mode without you needing to do anything, it can take hours. If your Phantom 3 batteries are not charging it means the batteries are in hibernation mode, so it is recommended you give it at least 3-4 hours before going further. You can use a more powerful charger to get it out of hibernation mode faster, the battery supports 12V-1.5A, 9V-2A, and 5V-3A.The P3 batteries are protected by a smart charge and discharge function built into the battery itself. Drone batteries are made of lithium polymer and utilize advanced technology, requiring rigorous maintenance and storage routines. Most of the batteries are light and easily rechargeable. This is why drone manufacturers find it appropriate to use them in aircraft. However, Phantom 3 batteries can sometimes let you down by refusing to charge. So, what are some of the reasons these batteries may fail to charge? Insert the battery to the aircraft, connect the USB-C charger or PD fast charger to the USB-C port of the aircraft, and the Battery Level LEDs in an array blink successively. Use this 4480mAh LiPo 4S rechargeable Battery as a spare or replacement for your Phantom 3 drone. DJI's new generation intelligent flight battery is great to have on hand if you want to extend your flight times without having to wait for batteries to recharge. This high performance battery offers a super-long flight time of up to 23 minutes and features bright LEDS that let you know the status and remaining power of your battery in real time. The charger will pause the charging process if the battery core temperature is out of operating range (0 to 40 degrees Celsius).
So if you can somehow get the battery out of hibernation and charge it to 30% you should defiantly do a firmware refresh to prevent this problem in the future https://www.youtube.com/watch?v=vusc1BFJX40 Video can’t be loaded because JavaScript is disabled: How to recharge a fully flat lipo (lithium polymer) battery (https://www.youtube.com/watch?v=vusc1BFJX40) The video above is a tutorial on how to fix and recover a fully flat Lithium Polymer battery. DJI Intelligent Flight Battery Fix: Devices will take longer to charge if both ports are used for charging simultaneously. Tested in a lab environment and should be taken as reference only.Connect the battery to the charger, and the Battery Level LEDs in an array blink successively. The charging time for one battery is approximately 50 minutes. After the battery is fully charged, the four Battery Level LEDs are off. Detach the charger after charging is complete.
The DJI Phantom 3 intelligent flight battery supports input of 12V 1.5 A / 9V 2A / 5V 3A. 6. Overheating For this, you don’t have to do anything, unplug it and give it 30 minutes till it cools down then it will start charging normally. 7. Faulty charger Very carefully and gently disconnect the balancing plug/loom(Lithium Polymer balance plug) to the IC.
Different Types of Drone Batteries
A software problem that can be fixed with a firmware refresh, which is not easy to do because you can’t turn the drone on in the first place LEDs to show you how much battery remains and the current status of the battery while flying your DJI Phantom 3. During the charging process, the battery level LEDs of both the Intelligent Flight Battery and the remote controller will blink sequentially, indicating the current battery level. After fully charged, the four Battery Level LEDs emit a solid light. Please disconnect the aircraft and charger.
Great Deal 
New Comment